Research Papers and Books Published

 

1 January, 2017 to Till date

Journal Publications:

  1. S. Jagadha, D. Hymavathy and N. Kishan, “Soret and Dufour Effects on the Boundary Layer Radiative MHD Nanofluid Flow Over a Vertical Plate with Chemical Reaction, Journal of Nanofluids, Vol. 6, Issue 1, pp. 97-104, 2017. (DOI:10.1166/jon2017.1295, Impact Factor: 0.90) 
  2. P Sridhar, V Naga Smitha and B P Singh, “Optimization for Placement of FCL in Distribution System by Voltage Controlled Method”, McGraw-Hill Education 2017.(EI, ISI Web of Science, DBLP, Scopus Indexed) 
  3. K Nehru, “Design of Low-Power Adders Using Double Gate & MTCMOS Technology”, Journal of Theoretical and Applied Information Technology, Vol. 95, Issue 1, pp. 78-86, 2017. (ISSN: 1992-8645, Scopus Indexed)

Conference Publications:

  1. Madhu Bala Myneni, Y. Srividya and Akhil Dandamudi, “Correlated Cluster Based Imputation for Treatment of Missing Values,” International Conference on Computational Intelligence and Informatics, Vol. 507, pp 171-178, 2017. (ISBN: 978-981-10-2470-2 (Print), ISBN: 978-981-10-2471-9 (Online), ISSN: 2194-5357, DOI:10.1007/978-981-10-2471-9_17)
  2. K Vijaya Sekhar Reddy, “Wants of The Middle Division Family and Their Fiscal Status”, International Conference on Contemporary Issues in Science, Engineering & Management, Bhubaneswar, India, 18 – 19 February 2017. (Scopus indexed)
  3. P Sridhar, S Swathi, P Mallikarjuna Sarma and A Sathish Kumar, “PLC Based Star - Delta Starter For Three Phase Squirrel Cage Induction Motor”, International Conference on Advances in Computer Science and Engineering,  Hyderabad, India,February, 2017. (Accepted)
  4. P. Sridhar G. Anusha and P. Shiva Kumar, “ Study of Fuel cell fed DC-AC Multi Level converter in Induction Motor Drives”, National Conference on Advances in Control, Power, Energy and Electronic Systems, Hyderabad, India,February 4, 2017. (Accepted)
  5. P. Sridhar, G. Hanna and A. Satish Kumar, "Three Port DC-DC Closed loop Converter for Photovoltaic Stand-Alone System," National Conference on Advances in Control, Power, Energy and Electronic Systems,Hyderabad, India,February 4, 2017. (Accepted)
  6. P. Sridhar and Rohini Kulkarni, “Analysis of Speed Control of Brushless DC Motor using Hybrid Fuzzy Controller”, National Conference on Advances in Control, Power, Energy and Electronic Systems, Hyderabad, India,February 4, 2017. (Accepted)
  7. Abdurahman, Muhammed and Kottaparamban, Musadhique, “Prince of Morocco, Shylock and Caliban: A Critical Engagement on Shakespeare’s Racial and Religious Prejudices”, Two-Day International Seminar on Nature, Culture, and Shakespeare: Interrogating and Negotiating the Significations, Kolkata, India, Jan. 10-11, 2017.
  8. T Vanaja, Ch V K N S N Moorthy and V V S Harnadh Prasad, “Computational Analysis of a CD Nozzle with SED for a Rocket Air Ejector in Space Applications”, International Conference on Advances in Computer Science, Engineering and Communications, Hong Kong, China, 16- 17 January 2017.
  9. N. Venkat Rao, K. Vijaya Sekhar Reddy and B. Rajesh “India –Retailing – Destination”, IEEE International Conference on Advanced Computing System, Hyderabad, India, 5 – 7 January 2017.
  10. KP Musadhique,  “Identity, Subjectivity and Performance: Documenting the Community in Home Cinemas of Malabar”, International Symposium on Mapping 21 Century Indian Political Documentary Films, Kerala, India, 14 – 16 February, 2017.
  11. C Raghavendra, “Iris Technology: A Review on Iris Based Biometric Systems for Unique Human Identification”, International Conference on Algorithms, Methodology, Models and Applications in Emerging Technologies, Chennai, India, 17 – 18 February 2017.
  12. Athota Rathan, “Design of Propulsion Module for Sample Return Mission to 2010TK7 (Asteroid)”, International Conference on Contemporary Issues In Science, Engineering & Management, Bhubaneswar, India,  18 – 19 February 2017. (Scopus Indexed)
  13. Athota Rathan, “Dynamics and Structural Analysis of Re-Entry Module for A Sample Return Mission to 2010TK7”, ISME Conference on Mechanical Engineering Enabling Sustainable Development, NIT-Warangal, India, 23 – 25 February 2017.

 

1 January, 2016 to 31 December, 2016

Journal Publications:

  1. K. Srinivasa Reddy, V. Vijaya Kumar, V. Venkata Krishna, “Face Recognition using Multi Region Prominent LBP Representation,” International Journal of Electrical and Computer Engineering, Vol. 6, Issue 6, pp. 2781-2788, December, 2016. (ISSN: 2088-8708, DOI: 10.11591/ijece.v6i6.12006, SCOPUS Indexed, Impact Factor: 0.16)
  2. P. Ila Chandana Kumari, S. Swarajya Laxmi, B. Rekha, B. Pravallika, G. Chaitanya, Syed Umar, and Azeem Mohammed Abdu, “VMM Based Secured Virtualization in Cloud-Computing,” Indonesian Journal of Electrical Engineering and Computer Science, Vol.4, No.3, pp.643-648, December 2016. (ISSN: 2502-4752 DOI:10.11591/ijeecs.v4.i3)
  3. M L Prasanthi, A. Krishna Chaitanya, N. Sambasiva Rao, “A Survey on Outlier Detection Methods in Spatio-Temporal Datasets”,International Journal of Advanced Engineering Research and Science (IJAERS), Vol. 3, Issue 11, Nov. 2016.  (ISSN: 2456-1908, DOI: https://dx.doi.org/10.22161/ijaers/3.11.27)
  4. P. Ila Chandana Kumari, P. Gayathri, N. Rajesh, Syed Umar, G, Chandra sekhar, Syed Umar, and Azeem Mohammed Abdul, “Designing of Medical Processor unit for Intelligent Network-Based Medical Usage,” Indonesian Journal of Electrical Engineering and Computer Science, Vol. 4, No. 3, pp. 532-537, December 2016. (DOI:10.11591/ijeecs.v4.i3, SCOPUS Indexed).
  5. B. Dhanalaxmi, G. Apparao Naidu, and K. Anuradha, “A Fault Prediction Approach based on the Probabilistic Model for Improvising Software Inspection,” Indian Journal of Science and Technology, Vol. 9, Issue 45, December 2016. (ISSN: 0974-5645, DOI: 10.17485/ijst/2016/v9i45/101581, Web of Science)
  6. B. Dhanalaxmi, G. Apparao Naidu, and K. Anuradha, “Practical Guidelines to Improve Defect Prediction Model – A Review”, International Journal of Engineering Science Invention, Vol. 5, Issue 9, pp. 57-61, September 2016. (ISSN: 2319 – 6734, Google Scholar Indexed, Impact Factor: 1.786)
  7. G.Sravanthi, P.Hanuma and C. Satya Sandeep ,”Residual Measurement Aluminium 5052 using X-Ray Diffraction Method,” International journal of Engineering research and management, Vol. 03, Issue 12, December 2016.(ISSN:2349-2058,Impact factor 2.37, Thomson Reuters Indexing)
  8. Ch.Ragha Leena, G.Swathi and M. Snigdha, “An Experimental Investigation of Annular Fins Under Forced Convection”, International journal of Engineering research and management, Volume-03, Issue 12, and December 2016.. (ISSN: 2349-2058,Impact factor 2.37, Thomson Reuters ,Indexed)
  9. A.Rathan Babu, Y.Swetha , GSD Madhav and R.Suresh Kumar, “Design and Structural Analysis of Propulsion Module Foe Sample Return Mission to 2010K7”, International journal of Engineering research and Technology, Vol. 05, Issue 12, December 2016. (ISSN: 2278-0181, Impact factor:3.935 , Google scholar Indexed)
  10. P Chandra Shekar Rao, K Babitha, K V Mani Kumar, “CFD Flow Analysis of a Reentry Space Vehicle with Wing and without Wing”,International Journal and Magazine of Engineering, Technology, Management and Research(IJMETMR),Vol. 03,Issue: 9, September,2016.(ISSN:2348-4845,Impact factor:3.8, Google Scholar Indexed)
  11. Sudarsan Gajula, K Babitha, K.Bharadwajan, “Numerical Analysis of An Aero Spike Nozzle ”, International Journal and Magazine of Engineering, Technology, Management and Research, Vol. 03, Issue 9, September,2016.(ISSN NO:2348-4845, Impact Factor:3.8, Google Scholar Indexed)
  12. Bhavana A.T. Rajesh Kumar, P.Kesava Rao, "FPGA Based Embedded System Architecture Design for CCSDS   Image Decompression,”      Global Journal of Advanced Engineering Technologies, Vol. 5, Issue 3, pp. 352-359,October, 2016. (ISSN (Online): 2277-6370 & ISSN (Print):2394-0921, Google Scholar, Research Gate, Index Copernicus, Impact Factors: Cosmos 3.69, GIF: 1.009, IIFS:0.998)
  13. P. Kesava Rao, J.K. Kishoreand  L.J.V. Kumar, "Murthy Remella      RS_GIS based Operational Monitoring of Indian Maritime and Environs”, International Journal of Earth Sciences and Engineering (IJEE)       Volume 09, No. 03, pp:84-92, June 2016. (ISSN: 0974-5904      Scopus,  Geobase Elsevier, Impact Factor: SJR:0.17)
  14. K. Mamatha, P. Kesava Rao and S. Shireesha, "Conflict Management and Resolution Strategies In Engineering Colleges in T.S,”      International Journal of Management,Vol. 7, Issue 7, Nov –Dec 2016, pp. 144–152. (ISSN:  0976-6502 (Print), ISSN: 0976-6510 (Online),   Thomson Reuter Indexed)
  15. V. Srinivas, Ch. V. K. N. S. N. Moorthy, V. Dedeepya, P. V. Manikanta, and V. Satish, “Nanofluids with CNTs for Automotive Applications,” Journal of Heat and Mass Transfer, Springer Berlin Heidelberg, Springer, Vol. 52, Issue 4, pp. 701-712, Apr.  2016. (ISSN: 1432-1181 (Online), ISSN: 0947-7411 (Print), DOI: 10.1007/s00231-015-1588-1, Scopus Indexed, Impact Factor: 1.044)
  16. C. Mukunda, I. Surya Prabha, and K. Sreenu, “Providing Security in Cloud Based Network Through Software Defined Network,” Journal of Theoretical and Applied Information Technology, Vol. 84, Issue 2, pp. 283-293, Feb. 2016. (ISSN: 1992-8645, Scopus Indexed)
  17. C. Mukunda, I. Surya Prabha, and P. Gayathri, “Load Balance Scheduling Algorithm for Serving of Requests in Cloud Networks Using Software Defined Networks,” International Journal of Applied Engineering Research, Vol. 11, Issue 6, pp. 3910-3914, 2016. (ISSN: 0973-4562, Scopus Indexed)
  18. C. Mukunda, I. Surya Prabha, and P. Gayathri, “Effective Pretending Encroacher in A Cloud Networks Using Software Defined Networks,” International Journal of Applied Engineering Research, Vol. 11, Issue 6, pp. 2938-2941, 2016. (ISSN: 0973-4562, Scopus Indexed)
  19. N. Anusha, “A DSP Based Embedded System for Noise Removal using Beagle Board-XM,” International Journal of Engineering Research & Technology, Vol. 5, Issue 02, pp. 356-358, Feb. 2016. (ISSN: 2278-0181, DOI:  http://dx.doi.org/10.17577/IJERTV5IS 020435, Google Scholar Indexed, Impact Factor: 1.76)
  20. B. Padmaja, V. V. Rama Prasad, and K. V. N. Sunitha, “Connecting Productivity with Social Capital via Daily Mobile Phone Logs,” International Journal of Social Networking, Vol. 5, Issue 21, pp. 62-74, Apr.  2016. (ISSN: 2169-3323 (Online), 2169-3285 (Print), DOI 10.1109/ICISE.2016.16, Google Scholar Indexed, Impact Factor: 1.02)
  21. Srinivasan Vathsal, “Kalman Filter on Power Electronics and Power System Applications,” International Journal of Trend in Research and Development, Vol. 3, Issue 2, pp. 235-238, May - June 2016. (ISSN: 2394-9333, Impact Factor: 2.010)
  22. Sanket Dilip Gore, Kodamasimham Bharadwajan, and Srinivasan Vathsal, “Smokeless Solid Propellants Performance in Various Grain Configurations for A Missile Application,” International Journal of Emerging Technology and Advanced Engineering, Vol. 6, Issue 3, pp. 559-604, Mar.  2016. (ISSN: 2250-2459, Impact Factor: 2.324)
  23. Papa Rao Nalajala and Bhavana Godavarthi, “Design of Intelligent Road Traffic Control System for Ambulance Using RF and GSM Technology,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, Issue 1, pp. 70-73, Jan. 2016. (ISSN: 2278-3091, Impact Factor: 0.378, Google Scholar)
  24. Anil Gantala, Dasari Swathi, J. Sravana, and Paparao Nalajala,  “Automatic License Plate Detection and Character Recognition in License Plate,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, Issue 1, pp. 46-50, Jan. 2016.(ISSN: 2278-3091, Impact Factor: 0.378)
  25. S. Deepthi, G. Mary Swarnalatha, and Paparao Nalajala,  “Wireless Local Area Network Security Using Wpa2-Psk,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, Issue 1,  pp. 41-45, Jan. 2016.  (ISSN: 2278-3091, Impact Factor: 0.378)
  26. Shaik Salauddin, Paparao Nalajala, and Bhavana Godavarthi, “Sound Fire Extinguishers in Space,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, Issue 1, pp. 85-87, Jan. 2016. (ISSN: 2278-3091, Impact Factor: 0.378)
  27. D. Khalandar Basha, S. Padmaja, and P. Monica Raj, “Low Power and Speed M-GDI Based Full Adder,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, pp. 88-91, Jan 2016. (ISSN: 2278-3091, Impact Factor: 0.378)
  28. D. Khalandar Basha, M. Rajanikanth, and C. Mohith, “Elimination of Glitch in DG-GDI Based Full Adder,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, pp. 92-96, Jan. 2016,  (ISSN: 2278-3091, Impact Factor: 0.378)
  29. K. Vijay Kanth and S. Lakshmanachari, “Myoelectric Interfaces Based Assistive Robot for Human Collaborative Work,” International Journal of Professional Engineering Studies, Vol. V, Issue I, pp. 218-223, July 2015. (Impact Factor: 3.825)
  30. B. Naresh, S. Rambabu and G. Lakshmi Narayana, “Implementation of DDR SDRAM Memory Controller for Embedded SOC,” International Journal of Advanced Trends in Computer Science and Engineering, Vol.5, No.1, pp. 101-105, 2016. (ISSN: 2278-3091, Impact Factor: 0.378)
  31. P. Sai Ram, A. Sri Harsha, E. Uma Shankari, and N. V. Krishna Rao, “Detection of Malware using Signature Based Algorithms Undergoing Database Verification,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, Issue 1, pp. 13-18, Jan. 2016. (ISSN: 2278-3091, Impact Factor: 0.378)
  32. B. Abhi Ramana and B. Padmaja, “An Approach for Identification of Evidences for App Fraud Detection,” International Journal of Research in Advanced Computer Science Engineering, Vol. 1, Issue 11, pp. 33-37, Apr.  2016.(ISSN: 2454-423X (Online), Google Scholar Indexed, Impact Factor: 5.332)
  33. B. Neeraja, S. J. Sowjanya, and Y. Subba Rayudu, “Cryptography Victimization Fitful Framework Integration,” International Journal of Computer Sciences, Vol. 21, Feb.  2016. (ISSN: 4142-3453 (Online), Impact Factor: 3.5)
  34. P. Sai Ram, A. Sri Harsha, E. Uma Shankari, and N. V. Krishna Rao, “Detection of Malware using Signature Based Algorithms Undergoing Database Verification,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, Issue 1 , pp. 13-18, Jan. 2016.(ISSN: 2278-3091, Impact Factor: 0.378)
  35. Koona Hemanath, Ch Srikanth, and Y Subba Rayudu, “Key Exchange Technique for Parallel Network File Systems, Vol 7, Issue 7, Feb.  2016.(ISSN: 6201-3454 (Online). Impact Factor: 4.5)
  36. S Swathi and S. Radhika, “Development and Testing of  Non - Isolated Flyback Converter,” International journal of Scientific Engineering and Technology Research, Vol. 05, Issue  01, pp. 111-121, Jan. 2016. (ISSN: 2319-8885, Impact Factor: 4.162)
  37. S. Radhika, S Swathi, and Sarfaraz Nawaz Syed, “Design and Analysis of Current mode Control of Boost Converter,” International Journal of Scienceand Research, Vol. 05, Issue 01, pp. 801-806, Jan. 2016.(ISSN: 2319-7064 (Online), Google Scholar Indexed, Impact Factor: 6.319)
  38. Sathish Kumar, S. Swathi, and K. Devender Reddy, “Control Algorithms of Distribution Static Compensator for Power Quality Improvement,” International Journal of Engineering & Research Technology, Vol. 5, Issue 1, pp. 422-429, Jan. 2016. (ISSN: 2278-0181, DOI:  http://dx.doi.org/10.17577/IJERTV5IS010423, Google Scholar Indexed)
  39. N. Sindhu and P. Mabuhussain, “Enhancement of Solar Cell Efficiency in Solar Manufacturing Plant,” International Journal of Science and Research, Vol. 5, Issue 5, pp. 824-828, May 2016. (ISSN: 2319-7064 (Online), Google Scholar Indexed, Impact Factor: 6.319)
  40. Ch. V. K. N. S. N. Moorthy and Vadapalli Srinivas, “Corrosion and Heat Transfer Characteristics of Water Dispersed with Carboxylate Additives & Multi-walled Carbon Nano Tubes,” Journal of the Institution of Engineers (India): Series C, Springer India, Vol. 2, Issue 3, pp. 59-69, 27 Feb. , 2016.(ISSN: 2331-9755 (Online), ISSN: 2331-9747 (Print), DOI: 10.13189/nn.2014.020302, Chemical Abstracts Service, Google Scholar Indexing)
  41. P. M. Sharma and P. Sridhar, “Solar Tracking”, International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, No. 1, pp. 113-116, 2016. (ISSN: 2278-3091, Impact Factor: 0.378)
  42. P. M. Sharma and P. Sridhar, “Three Phase Reactive Power Control Using Lab view,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, No. 1, pp. 117 -119, 2016. (ISSN: 2278-3091, Impact Factor: 0.378)
  43. V. Srikanth, G. Prasad, K. Venugopal, G. Rohith, and P. Sridhar  “Vehicle Tracking and Detection By Using  GPS, GSM and MEMS a Prototype Model,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, No. 1, pp. 106 -109, 2016. (ISSN: 2278-3091, Impact Factor: 0.378)
  44. V. Srikanth, G. Prasad, B. Chakrapani, Samule Jaswanth, and P. Sridhar “Micro Controller Based Speed Control of  a DC Motor using PWM Technique,” Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, No. 1, pp. 124 -127, 2016. (ISSN: 2278-3091, Impact Factor: 0.378)
  45. K. Vijaya Sekhar Reddy, Roopalatha, and P. Bindu Madhavi, “Pleasure of Client Aggressive Marketing Policy by Management,” Journal for Advanced Research in Commerce and Management Studies, pp. 48 – 53, 2016. (ISSN: 2394-837X (Online), SIS Indexed. Impact Factor: 2.8)
  46. K. Vijaya Sekhar Reddy, Roopalatha, and P Bindu Madhavi, “Social Networks are Burgening Lately, Proceedings of National Conference on Trends in Science and Technology, pp.120-124, May 2016. (ISSN: 2395-7964)
  47. K. Vijaya Sekhar Reddy, P. Bindu Madhavi, and B. Rajesh, “Evolution and Development of Human Resource Management – A Over View,” International Journal of Development Research, Vol. 06, Issue, 07, pp. 8742 - 8746, July 2016. (ISSN: 2230-9926, Google Scholar Indexed, Impact Factor: 4.25)
  48. K. Vijaya Sekhar Reddy, Y. Deepika, and P. Bindu Madhavi, “Social Networks Have Undergone A Dramatic Growth in Recent Years,”  International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5, No. 1, pp. 51-55, Jan. 2016. (ISSN 2278-3091, Google Scholar Indexed, Impact Factor: 0.378)
  49. K. Spandana Reddy, Viaya Sekhar Reddy, and I. Shireesha, “Customer Satisfaction of Defensive Marketing Strategy by Management,” International Journal of Advanced Trends in Computer Science and Engineering, Vol. 5 , No. 1, pp. 56 -59, Jan. 2016. (ISSN 2278-3091, Google Scholar Indexed, Impact Factor: 0.378)
  50. K. Vijaya Sekhar Reddy, B. Rajesh, P. Bindu Madhavi, “Application Knowledge Management Based Utilization of Conceptual Foundation,” International Journal of Pure and Applied Researches, Vol. 3, Issue 1, 2016. (ISSN: 2455-474X, Google Scholar Indexed, Impact Factor: 3.498)
  51. K. Nehru, T. Nagarjuna, G. Shruthi and Shashikanth Reddy, “Performance&Study of 16-Bit Vedic Multiplier using High Speed Adders” .Materials Today: Proceedings. (Elsevier Journal- Accepted for publication).
  52. K. Priyanka, K. Nehru, S. Rambabu, Nandeesh Kumar Kumaravelu, Design of Low-Power Adders Using Double Gate & MTCMOS Technology, Journal of Theoretical and Applied Information Technology, Vol. 95, No. 1, pp. 78-86.
  53. Somaiah, G. Sarat Raj and U.S.P Rao, “Design Procedure of Composite LPG Cylinder,” International Journal of Application or Innovation in Engineering and Management, Vol. 5, Issue 11, pp. 93-99, November 2016. (ISSN: 2319-4847 (Online), Thomson Reuters Indexed, Impact factor: 5.427)
  54. N. Santhi Sree, N V S S Sudheer and P Bhramara, “Experimental Analysis of Pulsating Heat Pipe” International Journal of Scientific &Engineering Research”, Vol. 7, Issue 6, pp. 292-299, June 2016. (ISSN: 2229-5518 DOI: dx.doi.org/10.14299/ijser.2016.01, Impact factor: 0.18)
  55. KGK Murti and C. Labesh Kumar, “Design and Development of Micro Linear Friction Welding Machine,” International Journal of Advanced Scientific Technologies, Engineering And Management Sciences, 2016. (ISSN:2454-356x, Impact factor 3.022,  DOI: 10.22413/ijastems)
  56. G. Venkata Ramana, “Hydraulic Simulation of Existing Water Distribution System using EPANET at Dire Dawa City, Ethiopia,” Indian Journal of Science & Technology, December 2016. (ISSN: 0974-5645)
  57. G. Venkata Ramana and Dawit T Birhaun, “Task of Epanet Analysis of Existing Water Distribution System at Dire Dawa City, Ethiopia,” International Journal of Emerging Trends in Engineering Research, Vol. 4, Issue 10, pp. 86-92, 2016. (ISSN: 2347 – 3983 (Online), Impact factor: 0.987)
  58. G. Venkata Ramana, C. Madhusudana Rao and V. S. S. Sudheer, “Rainfall analysis for Drought Proneness at Western Rajasthan, India,” International Journal of Economic Research,, Vol. 13, Issue 1, pp. 275-301, 2016. (ISSN 0972-9380 (Online), Scopus Indexed)
  59. Kavita Singh,  M. Anji Reddy, “Application of  Remote Sensing and GIS in Land use/ Land Cover change Detection Analysis” GE-International Journal of Engineering Research, Vol. 4, Issue 12, pp. 70-78, December 2016. (ISSN: 2321-1717(online), 2394-420X (Print), Scopus Evaluation Tracking ID D249C6F975E005F, Impact Factor- 5.613)
  60. Kavita Singh, “Rural Level Information System using GIS and Remote Sensing” International Research journal of Human Resources and Social Sciences, Vol. 3, Issue 10, pp. 63-78, October 2016. (ISSN: 2349-4085(online), 2394-4218 (Print), Scopus Evaluation Tracking ID 6971A4120D297CC9, Impact Factor- 3.866)
  61. Akhila Manne, D. N. Satyam, “Influence of Particle Shape and Size on the Dynamic Soil Propertie”, Japanese Geotechnical Society Special Publication, Vol. 2, No. 24, pp. 897-902, 2016. (ISSN: 2188-8027 (Online), DOI: http://doi.org/10.3208/jgssp. IND-08)
  62. Srinivas Angadi, M. Padmavathi and Raja Sekhar Mamillapalli, “Challenges in Adopting Smart City Concepts and Their Sustainability in Indian Conditions”, International Journal of technology, Vol. 5, Issue 2, pp, 274-280, 2016. (Print ISSN: 2231-3907. Online ISSN: 2231-3915),  DOI: 10.5958/2231-3915.2015.00035.8 Impact factor: 0.123)
  63. G. Anil kumar, Suraj baraik,  “RHA as A Limited Alternate of Cement For S-Acid Attack on Concrete,” International Journal of Innovative Technology and Research, Volume No.4, Issue No.5, pp. 3895–3898, 2016.  (ISSN: 2320 –5547(Online), DOI: http://www.ijitr.com/index.php/ojs/article/view/1098, Impact Factor 4.236)
  64. Praveena Rao and B. Jena, “Composite Action in RCC and Brick Masonry,” International Journal of Scientific and Engineering Research, Vol. 7, Issue 1, pp 297-305, 2016. (ISSN: 2229-5518 (Online)), Google scholar indexed, Impact factor: 3.8)
  65. J. Hymavathi, R.K. Sharma, “Effect of Fly Ash, Construction Demolition Waste and Lime on Geotechnical Characteristics of a Clayey Soil a Comparative Study,” Environmental Earth Science, Vol. 75, Issue 5, Article 377, pp.1-11, 2016 (ISSN 1866-6299 (Online), ISSN 1866-6280 (Print), DOI: 10.1007/s12665-015-4796-6, Scopus Indexed, Science Citation Expanded Indexed,  Impact factor: 1.765)
  66. J. Hymavathi, R. K. Sharma, “Comparative Study of Compaction and Strength of Soil Modified with Fly Ash and Construction Demolition Waste,” Indian Highways, Vol. 44, Issue 5 pp. 9-15, 2016. (ISSN 0376-7256 (Print))
  67. Vathsal, S.Sastry and Dr. Rao, “Multi Channel Multi Clock Frequency Speed Rate Real Time Industrial Standard Parallel PRBS CDMA Transceiver Array ASIC SOC Card Design For Ultra High Speed Wireless Communication Products/Application Cards”, International Journal of Current ResearchVol. 8, Issue, 09,September, 2016. (ISSN: 0975-833X,  Google Scholar)
  68. S. Vathsal, P. Shiva Kumar and M. Diva Kumar, “Current Trends in Repetitive Process Control of Power Electronics System”, National Conference on Resent Advances in Sciences and Technology, Uttarakhand, India, August, 2016. 
  69. S. Vathsal, P.N.V.M,  Sastry and  D. N. Rao, “Multi Channel Multi Clock Frequency Speed Rate Real Time Industrial Standard Parallel PRBS CDMA Transceiver Array ASIC SOC Card Design For Ultra High Speed Wireless Communication Products/Application Cards”, The International Journal of Engineering and Science,  Vol. 5, Issue 9 pp. 20-32, 2016.  (ISSN (e): 2319 – 1813 ISSN (p): 2319 – 1805)
  70. S. Vathsal, P.N.V.M,  Sastry and  D. N. Rao, “H.D.L Design for Ultra High Multi Frequency Rate P.R.B.S Generator for Identification of Property of Different P.R.B.S Pattern Sequences for Ultra High Speed Wireless Communication Products /Applications”,  The International Journal of Engineering and Science, Vol. 5 Issue  9, pp. 1-7, 2016. (ISSN (e): 2319 – 1813 ISSN (p): 2319 – 1805, Google Scholar)
  71. S. Vathsal, P.N.V.M,  Sastry and  D. N. Rao, “Ultra High Multi Clock Frequency Spectrum-Zetta, Yotta, Xona,Weka Hetz Real Time Clock P.R.B.S Data Framer Array A.S.I.CI.P Core Encrypion and Decryption of Different Patterns for Large/ Big Wireless Data/Cloud/ Cluster/ Parallel Distributed Computing Station”,  The International Journal of Engineering and Science (IJES) Vol. 5, Issue  9, pp. 8-28, 2016. (ISSN (e): 2319 – 1813 ISSN (p): 2319 – 1805, Google Scholar)
  72. S. Vathsal, P.N.V.M,  Sastry and  D. N. Rao, “ Weka Hertz Clock Based Weka Bits per Second P.R.B.S Data array Encryption A.S.I.C for Parallel Pipelined V.L.I.W Array Based Big Data Distributed Processing/Cloud/Internet Grid Computing Wireless Application”,  The International Journal Of Engineering And Science (IJES), Vol. 5, Issue  9, pp. 29-37, 2016. (ISSN (e): 2319 – 1813 ISSN (p): 2319 – 1805, Google Scholar)
  73. S. Vathsal, Sanket Dilip Gore and Kodamasimham Bharadwajan, “Smokeless Solid Propellants Performance in Various Grain Configurations for a Missile Application”, International Journal of Research in Engineering and Applied Sciences, Vol. 06, Issue 03, March, 2016.  (ISSN 2249 -3905, Impact Factor 6.573, Google Scholar)
  74. S.Vathsal, P. N. V. M Sastry, D. N. Rao and A. Rajaiah, “HDL Design 2e10-1 Peta Bits Per Second P.R.B.S I.P Core Generator for Ultra High Speed Wireless Communication Products”, International Journal on Recent and Innovation Trends in Computing and Communication,Vol.3 Issue. 8, 2016.   (ISSN: 2321-8169 5252 – 5255, Google Scholar, Impact Factor: 5.837 )
  75. S.Vathsal, P. N. V. M Sastry, D. N. Rao and A. Rajaiah, “HDL Design for Peta Hertz Clock based 2e31-1 Peta Bits Per Seconds PRBS Design for Ultra High Speed Applications/Products”,International Journal on Recent and Innovation Trends in Computing and Communication,Vol.3 Issue. 8, 2016.   (ISSN: 2321-8169 264 – 267, Google Scholar, Impact Factor: 5.837 )
  76. V. Anitha Rani and Y. Bharathi Kumari, “One Pot Synthesis and Anti Bacterial Activity(4)-z-benzylidine-1-methyl-2-styryl-1H-imidazol-5(4)-one”,Asian journal of chemistry, Vol. 28, No. 7, pp. 1975-1978, 2016. (DOI: dx.doi.org/10.14233/ajchem.2016.19763.Impact Factor: 0.45)
  77. S. Jagadha, D. Hymavathy and N. Kishan, “ MHD Mixed Convection Non-Darcy Porous Medium Saturated with a Nanofluid Under the Influence Radiation”, Journal of Nanofluids, Vol. 5, pp. 1-8, 2016 (DOI:10.1166/jon.2016.1206, Impact: 0.90) 
  78. N. Kishan and S. Jagadha,Influence of Thermophoresis and MHD on Non-              Darcy Mixed Convection Heat   and Mass Transfer Along a Vertical Flat Plate         Embedded in a Porous Medium in   Presence of Radiation, Journal of Aerodynamics and Thermophysics, Spinger, Vol. 23, Issue 1, pp. 97-108, 2016.   (ISSN: 0869-8643, SCOPUS indexed, Impact factor: 0.365)
  79. Kottaparamban, Musadhique., “Dalit History  and Formation of an Imagined Community”  International Research Journal of Management, Sociology & HumanitiesVol 7 Issue 03, pp. 141-156 , March, 2016. ( ISSN 2277 – 9809 (online) ISSN 2348 - 9359 (Print), DOI: http://www.irjmsh.com/article_pdf.aspx?id=4203.pdf, Index Copernicus International, Impact Factor: 0. 98)
  80. Kottaparamban, Musadhique. “Book Review of No Alphabet in Sight: New Dalit Writing From South India Dossier 1: Tamil And Malayalam”, LangLit an International Peer-Reviewed Open Access Journal, Vol. 2 Issue 4, pp. 12-16,  12 May, 2016. (ISSN 2349-5189, DOI: https://langlit.org/vol-2-issue-4-2016/, Cosmos Foundation Germany Indexed, Impact Factor: 4.23)

Conference Publications:

  1. K. Mamatha, S. Shireesha and P.Kesava Rao, "Ratio     Detection And Resolution Of Teaching Staff Conflicts in Engineering Colleges”,      International Conference  on Business Management and social Innovation (ICBMSI),  World Research Forum for Engineers and Researcher (WRFER),      Chennai,  India, Dec. 2016.
  2. P. Kesava Rao, R. Murthy, J.K. Kishore and  P. NageswaRao, "Student Remote Sensing & Geospatial Programme (SRSGP) - A Potential Contribution for Digital India      Indian Society of Remote Sensing and Indian Society of GIS ( ISRS-ISG)”, National Symposium IIRS, Dehradun, India, Dec.  2016.
  3. J. Swetha and C. Labesh Kumar, “Torsion and Bending Analysis of Muv Chassis”, International Conference on Emerging Technologies in Mechanical Sciences”, Maisammaguda, India, 16 – 17 Dec. 2016. (ISBN: 978 93 83038 45, Impact factor 2.3)
  4. BDY Sunil and C. Labesh Kumar “Deposition of Stainless Steel on the Low Carbon Steel by Friction Surfacing”,  International Conference on Recent Innovations in Engineering and Technology, Hyderabad, India, 22 – 23 Dec. (ISBN:978-1-5396-2645-9)
  5. C. Labesh Kumar and  P. K. Dash, “Effect of Welding Properties on Strength of the Mild Steel an Experimental Approach”, International Conference on Future Technologies in Mechanical Engineering, Hyderabad, India,  25 – 26 Nov.  (ISBN 978-93-85101-24-3, Impact Factor 0.09)
  6. E. Naresh, GRK. Swami , and P.K. Dash , “Study on Missile Detection Method and Auto Destroy with Enemy Detecting and Alerting Robot”, All India Seminar on “Vehicle Aerodynamics Design, Chennai, India,  14 - 15 March 2016. (Google scholar Indexed)
  7. E. Naresh, P.K. Dash , and G. Shruthi Keerthi , “Analysis of NACA-4 Digit Aircraft Wing using 3D CFD”, 30th IEI National Convention of Aerospace Engineers and National Seminar on ‘Aerospace Technology: Future Trends and Developments’ Hosur, Tamil Nadu,  25 – 26 November, 2016. (Google scholar Indexed)
  8. J.K. Kishore, P.Kesava Rao, L.J.V. Kumar and R. Murthy, "Remote Sensing And Gis Based Oil Spill Monitoring In India’s Maritime Zone – A Techno Managerial Frame Work         Technical Session V, Emerging Technologies- Spill Detection and Surveillance Mumbai, India, Dec. 2016.
  9. S.Srikrishnan and P.K. Dash, “2D CFD Analysis on Deflagration to Detonation Transition in Closed Pipe Using Blockage”, All India Seminar on Vehicle Aerodynamics Design ,Hosur Local Center, Tamilnadu, 14 - 15 March 2016. (Google scholar Indexed)
  10. P.K. Dash, D. Anudeep, V. Pareekshith, E. Santosh Kumar, N. Sandeep Kumar and S.Srikrishnan, “Transonic Flow Analysis Over NACA 6 Digit Aerofoil Using CFD”, All India Seminar on “Vehicle Aerodynamics Design” Hosur Local Center, 14 - 15 March 2016. (Google scholar Indexed)
  11. CH V K N S N Moorthy, V V S H Prasad, V Srinivas, “Stress Analysis of Domestic Composite LPG Cylinder Using Classical Lamination Theory (CLT)”, International Conference on Hybrid and Composite Materials, Chemical Processing-HCMCP, Hyderabad, India, 316-321, 25th – 27th October, 2016. (Scopus Indexed)
  12. CH V K N S N Moorthy, V V S H Prasad, V Srinivas, “FEA and Comparative Parametric Analysis of Domestic Composite LPG Cylinder with Steel”, International Conference on Hybrid and Composite Materials, Chemical Processing-HCMCP, Hyderabad, India, 329-335, 25th – 27th October, 2016. (Scopus Indexed)
  13. CH V K N S N Moorthy, V V S H Prasad, V Srinivas, “Composite Angle Ply Laminates and Netting Analysis of Domestic LPG Cylinder”, International Conference on Hybrid and Composite Materials, Chemical Processing-HCMCP, Hyderabad, India, 391-397, 25th – 27th October, 2016. (Scopus Indexed)
  14. KGK. Murti, “Selection of process parameters for Friction Welding of Automotive Engine Valves”, National Seminar on Recent Trends in Welding Technologies in Automobile Industries, Hyderabad, India, 18th –19th March, 2016.
  15. Gedatti Sarat Raju, N.N. Ramesh and A. Somaiah, “Friction Stir Welding of Metal Matrix Composites,” National Seminar on Recent Trends in Welding Technologies in Automobile Industries, Hyderabad, India, March 18-19, 2016.
  16. N. Santhi Sree, N V S S Sudheer and P. Bhramara, “Experimental Analysis of Pulsating Heat Pipe” National conference on Recent Trends in Mechanical Engineering, Hyderabad, India, 28 – 29 April, 2016.
  17. Harender Singh, A. Somaiah, V.V.S.H. Prasad, Dr. N.N. Ramesh, “Design of a Robot for Welding Applications,” National Seminar on Recent Trends In Welding Technologies In Automobile Industries, Hyderabad, India, March 18-19, 2016.
  18. N. Santhi Sree, N V S S Sudheer and P Bhramara, “Modeling and Analysis of Pulsating Heat Pipe,” International Conference on Future Technologies in Mechanical Engineering, Hyderabad, India, 25 – 26 November, 2016. (ISBN 978-93-85101-24-3)
  19. VVSH Prasad, N Santhi Sree and D Krishnaja “Intricacies in Fabrication of Automobile Space Frame Chassis,” National Seminar on Recent Trends in Welding Technologies in Automobile Industries, Hyderabad, India, 18 – 19 March, 2016.
  20. C. Srihari and R. Gangadhar Reddy, “A Latest Multipliplier using Twos’s Complement Method,” IEEE International Conference on Electrical, Electronics, and Optimization Techniques,  Chennai, India, pp. 35-39,  Mar. 3-5, 2016. (ISBN: 978-1-4673-9939-5, DOI: 978-1-4673-9939-5/16)
  21. N. Paparao, G. Bhavana, Shaik Salauddin, and R. Gangadhar Reddy “Sound Fire Extinguishers in Space Stations”  IEEE International Conference on Electrical, Electronics, and Optimization Techniques,  Chennai, India, pp. 67-72,  3 – 5 Mar. 2016. (ISBN: 978-1-4673-9939-5, DOI: 978-1-4673-9939-5/16)
  22. N. Paparao, G. Bhavana, M. Lakshmi Raviteja, and S. Deepthi, “Morse Code Generator Using Microcontroller with Alphanumeric Keypad,” IEEE International Conference on Electrical, Electronics, and Optimization Techniques, Chennai, India, pp. 78- 83, 3 – 5 Mar. 2016. (ISBN: 978-1-4673-9939-5, DOI: 978-1-4673-9939-5/16)
  23. K.  Baburaja, K. Venkata Subbaiah, T. Vanaja, and N. N. Ramesh, “Resultant Surface Roughness Aluminium and Hastelloy C-276, using Wire Electro Discharge Machining,” International Conference of Materials and Characterization, Hyderabad, India, 12 – 15 Mar. 2016. (ISSN: 2214-7853)
  24. D. Khalandar Basha, S. Padmaja, and P. Monica Raj, “Self - Biased GDI Based Full Adder,” IEEEInternational Conference on Smart Structures & Systems, Chennai, India, 23 – 24 Mar. 2016. (DOI:978-1-5090-0912-1/6)
  25. D. Khalandar Basha, M. Rajanikanth, K. Krishna Vamshi, and A. Pulla Reddy, “GLBB Based Symmetric 9T SRAM with Reset,” International Conference on Green Technologies for power Generation, Communication and Instrumentation, Chennai, India, Mar.  23-24, 2016. (ISBN:978-93-5254-979-5)
  26. D. Khalander Basha, A. Pulla Reddy, R. Raju, and G. Srinuvas Reddy, “Gated Body-Based Full Adder,” International Conference on Processing of Materials, Minerals and Energy, Ongole, Andhra Pradesh India, pp. 175-180, 29 – 30 July 2016. (Elsevier Materials Proceedings)
  27. D. KhalandarBasha, M. Rajanikanth, A. Pulla Reddy, V R Sheshagiri Rao, “2D Symmetric 6T SRAM With Reset”, IEEE Technical Sponsored International Conference ON “Recent Trends In Electronics Information and Communication Technology (RTEICT-2016),Bangalore, India. 20th&21th  May 2016. (DOI: 978-1-5090-0774-5/16/$31.00 © 2016 IEEE)
  28. D. KhalandarBasha, B. Naresh, S. Rambabu, D. Nagaraju, “BODY BIASED high speed full adder”,IEEE International Conference on Computer and Communication Technology (ICCCT), Kanchikacherla, India, 2016. (ISSN: 2367-3370)
  29. P Sridhar, V Purna Chandra Rao and  B P Singh, “Analysis of Fault and Determination of Damping Co-efficient and DC-Offset in a High Voltage Transmission Line”, International Conference on Processing of Materials, Minerals and Energy, Ongole, , India, July, 2016. (Science direct, Elsevier)
  30. Mr. M Diva Kumar, Dr. S. Vathsal, and Mr. K. Linga Swamy Reddy Computer Simulation of Complex Power Systems   International Conference on Intelligent Computing and Applications, Pune, India, December, 2016. (Scopus indexed, Accepted)
  31. K. Rajendra Prasad, N Rajasekhar, T Vishnu Vardhan Reddy, “Improving of Clustering Results for Speech Data by Visual Approach”, International Conference On Signal Processing, Communication, Power And Embedded System, Centurion University of Technology & Management, Paralakhemundi, Odisha, India, 2016.  (IEEE-Explore, Scopus)
  32. K. Rajendra Prasad, I Surya Prabha, N Rajasekhar, M Rajasekhar Reddy, “Social Data Analytics by Visualized Clustering Approach for Healthcare”, International Conference on Advanced Computing and Intelligent Engineering, C.V. Raman College of Engineering, Bhubaneswar, India, 2016.  (Springer, SCOPUS indexed)
  33. M. Suleman Basha and K Rajendra Prasad, “Improving the Performance of Speech Clustering Method,” International Conference on Intelligent Systems and Control (ISCO), Coimbatore, Tamil Nadu, India, 7th - 8thJan. 2016.
  34. B. Padmaja, V. V. Rama Prasad, and K. V. N. Sunitha, “Use of Reality Mining Dataset for Human Behavior Analysis - A Survey,” International Conference on Information Systems Engineering, Los Angeles, CA, USA, Apr.  20-22, 2016.(ISSN: 2160-1291, DOI: 10.1109/ICISE.2016.16)
  35. M. Bhavya, A. Harekrishna, and A. Soujanya, “An Efficient Mobile Health Monitoring System,” International Conference onRecent Trends in Engineering and Material Sciences, Jaipur, India, 17 – 19 Mar.  2016. (Scopus Indexed)
  36. Ch Srikanth, D. Abdulla, and R. Srikanth, “Better Safety and Efficiency in Attribute Based Data Sharing,” National Conference on Recent Trends in AdvancedComputing, Vijayawada, India, 30Apr.  2016.(ISSN-2321-5585 (Online), ISSN -2321-0338 (Print))
  37. Dilip Kumar Barai, G.Sridevi, Syed Umar, Srikanth Cherukuvada, and Royyuru Srikanth, “Design and Analysis of Amplitude and Divergence Scheme for solving Broadcast Storm Issues, ” International Conference on Electrical, Electronics, and Optimization Techniques, 3-5 Mar.  2016. (ISSN: 978-1-4673-9939-5,DOI: 978-1-4673-9939-5/16)
  38. Akil A. Chandran and Md. I. Younis, “Multi Frequency Excited MEMS Cantilever Beam Resonator for Mixer-Filter Applications,” IEEE International Conference on Signal Processing and Integrated Networks, Noida, India, 11 – 12 Feb.  2016.
  39. S. Vathsal and P. Shiva Kumar “Fast Implementation of Smart Grid in India” National Conference on Recent Power Engineering, Vizag, India, Apr. 2016
  40. K.  Baburaja, K. Venkata Subbaiah, T. Vanaja, and N. N. Ramesh, “Resultant Surface Roughness Aluminium and Hastelloy C-276, using Wire Electro Discharge Machining,” International Conference of Materials and Characterization, Hyderabad, India, Mar. 12-15, 2016.
  41. Rathnan, and Pankaj Priyadarshini, “Trajectory and Aerodynamics of Spacecraft in Aero Braking,” National conference on Large Scale Multi-disciplinary Systems of National Significance, ISRO Sriharikota, 24 - 25 June 2016.
  42. P. M. Sharma and P. Sridhar, “Solar Tracking”, International Conference on Advances in Computer Science, Engineering and Communications, Hyderabad, India, pp. 104 – 108,  23 -24 Jan. 2016. (ISSN: 978-93-5235-625-6)
  43. P. M. Sharma and P. Sridhar, “Three Phase Reactive Power Control Using Lab view,” International Conference on Advances in Computer Science, Engineering and Communications, Hyderabad, India, pp. 104 – 108,  23 -24 Jan. 2016. (ISSN: 978-93-5235-625-6)
  44. P Sridhar, V Purna Chandra Rao and B P Singhab, “Optimum Placement of Fault Current Limiter in 11 kV Distribution System”, International Conference on Processing of Materials, Minerals and Energy Ongole, India. July 2016 (ISSN 2214-7853, science direct, Elsevier)
  45. V. Srikanth, G. Prasad, K. Venugopal, G. Rohith, and P. Sridhar  “Vehicle Tracking and Detection By Using  GPS, GSM and MEMS a Prototype Model,” International Conference on Advances in Computer Science, Engineering and Communications, Hyderabad, India, pp. 104 – 108,  23 -24 Jan. 2016. (ISSN: 978-93-5235-625-6)
  46. V. Srikanth, G. Prasad, B Chakrapani, Samule Jaswanth, and P. Sridhar “Micro Controller Based Speed Control of  a DC Motor using PWM Technique,” International Conference on Advances in Computer Science, Engineering and Communications, Hyderabad, India, pp. 104 – 108,  23 -24 Jan. 2016. (ISSN: 978-93-5235-625-6)
  47. R. Gangadhar Reddy and Yash Pal Singh, “Novel Full Adder Cell for Low Power Arithmetic Applications,” IEEE International Conference on Computational Intelligence and Communication Networks, 23-25 December, Dehradun, India. (Accepted).
  48. R. Gangadhar Reddy and M. Ramesh Babu, “Design and Analysis of a Modified Inverter Circuit,” IEEE International Conference on Computational Intelligence and Communication Networks, 23-25 December, Dehradun, India.
  49. R. Gangadhar Reddy and Yash Pal Singh, “Design of Robust, Ultra Low-Power Efficient Full Adder Cell in sub-45nm Technologies,” International Conference on Sustainable Computing Techniques in Engineering, Science and Management, 9-10 September 2016. (Accepted, Scopus Indexed)
  50. K. Nehru, T.T. Linju and Parvathy Sreekumar “Real Time SOC Based Low Cost Smart Sensor Using DWT On FPGA” IEEE International Conference on Electronics and Communication Systems, Coimbatore, Tamilnadu, India, pp. 66-71, Feb. 25-26, 2016. (DOI : 978-1-4673-7832-1/16)
  51. N. Nehru, Nagarjuna Telagam, “Design a Low Power ALU and Synchronous Counter using Clock Gating Technique”, Springer International Conference onAdvancedComputing and Intelligent Engineering,  Bhubaneswar, Odisha, India, Dec 21-23, 2016.
  52. K. Nehru, K. Ramesh Babu, J. Sravana and Shasikanth reddy “Performance Analysis of Low Power and High Speed 16-Bit CRC Generator Using GDI Technique”,  IEEE  International Conference on Advanced Computing and Communication Systems, Coimbatore, Tamilnadu, India, pp. 1-5,22 – 23 Jan., 2016. (DOI: 10.1109/ICACCS.2016.7586358)
  53. N. Venkat Rao, K. Vijaya Sekhar Reddy and B. Rajesh “India –Retailing – Destination 7th International IEEE Conference on Advanced Computing System at VNR Vignana  Jyothi  Engineering & Technology,  Hyderabad, India, January  05-07-2017.
  54. Srinivas Angadi, M. Padmavathi, Raja Sekhar Mamillapalli, “Challenges in Adopting Smart City Concepts and their Sustainability in Indian Conditions”, Industry Academia Conference on Construction Management, Hyderabad, India, Dec. 4-5, 2015.
  55. R. Ramya Swetha, M. Swaroopa Rani “Studies of Chloride Attack on Sugarcane Baggase Ash Concrete,” National Conference on Sustainble Materials and Management Systems in Civil Engineering,  Hyderabad, India,  15th -16th  December 2016. (ISBN-978-81-932824-8-9)
  56. V. Anitha Rani and Y. Bharathi Kumari, “One Pot Synthesis of 5-benzylidene-3-arylamino-2-styryl-3,5-dihydro-imidazol-4-onederivatives & their Anti-Bacterial Activity Evaluation,  “International Congress on International on Recent Advances in Chemistry and Chemical Engineering”, Hyderabad, India, 11 – 13,  July 2016.
  57. Kottaparamban, Musadhique, “Between Perfection and Invisibility: Reading of Kocherathi as an Adivasi Testimonio,” International Seminar on Emerging Identities in Dalit and Tribal Literature and Society, Amarkantak, India, Sep. 02-04,  2016.
  58. Kottaparamban, Musadhique, “Religion, Community and Songs: Imagination of the Arabian Sea in Popular Culture” International Seminar on Sea and Literature, Thrissure, India, Sep. 29 – 30, 2016.
  59. Kottaparamban, Musadhique, “Community, Religion and Identity: Mappilappaattu and the Production of Knowledge”, India International Islamic Academic Conference (IIAC), New Delhi, India, Oct. 08-09, 2016.
  60. Kottaparamban, Musadhique, “Secularism, Modernity and Nationalism: Moudoodian Alternatives” National Seminar onRelevance of Modern Indian Political Thought: Gandhi, Deendayal, Hedgewar, Gollwarkar, Savarkar, Pattel, Ambedkar, Nehru, MD. Iqbal and Moulana Moudoodi, Banaras, India, Oct, 04-05, 2016.

1 January, 2015 to 31 December, 2015

Journal Publications

  1. Gurram Sunitha and A. Rama Mohan Reddy, “WRSP - Miner Algorithm for Mining Weighted Sequential Patterns from Spatio - Temporal Databases, International Conference on Computer and Communication Technologies, Advances in Intelligent Systems and Computing, pp. 379 - 381, Springer India, 2015.(ISSN: 1817-3195 (Online), ISSN: 1992-8645 (Print), DOI:10.1007/978 - 81 - 322 - 2517 - 1_31)
  2. Gurram Sunitha, S. Swarajya Laxmi, and D. Rajani Bai, “A Critical Review and Comparison of Cloud Storage Providers,” International Journal of Applied Engineering Research, Vol. 10, pp. 37552 - 37560, Nov. 2015.(ISSN: 0973–4562, Scopus Indexed)
  3. Surya Prabha, “Providing Security and Privacy in Cloud Computing Using Distributed Firewall and VPN,” International Journal of Science and Research, Vol. 4, Issue 10, pp. 801 - 806, 2015. (ISSN: 2319 - 7064 (Online), Impact Factor: 5.611)
  4. Y. Apparao, P. Sudheer, and Kadiyala Laxminarayanamma, “Data Management Environment with Data Warehousing for Big Data Architecture,” International Journal of Innovative Research in Computer Science & Technology, Vol. 3, Issue3, pp. 43 - 47, May - 2015.(ISSN: 2347–5552, Google Scholar Indexed, Impact Factor: 2.172)
  5. Surya Prabha, G. Prabhakar Reddy, V. Ramakrishna, and Y. Deepika, “Java Coding Ground With Security Editor,” International Journal of  Computer Science and Technology, Vol. 6, Issue 1, Mar.  2015.(ISSN : 0976 - 8491 (Online), ISSN: 2229 - 4333 (Print), Google Scholar Indexed)
  6. K. Swapna, Sudha Deepthi and Y. Subba Rayudu, “A Novel Multi Path Dynamic Routing forControlling Conflicts And Improving QOS in WSN,” International Journal of Research in Electronics & Communication Technology, Vol. 16, Issue 2, Oct.  2015.(ISSN: 2348 - 9065 (Online) ,  ISSN: 2349 - 3143 (Print), I20R Indexed, Impact Factor:1.747)
  7. K. SudhaDeepthi, A.Swapna, and Y. Subba Rayudu, “A Novel Passive IP Approach for Path File Sharing Through Backscatter in Disclosing the Locations,” International Journal of Computer Science, Oct.  2015.(ISSN: 4142-3453 (Online), Impact Factor: 3.5)
  8. T.S.P. Madhuri, J. Hima Bindu, “Collaborative Management of Resources in Cloud Computing,” International Journal of Computing, Communications and Systems, Vol. 4, Issue 1, Feb. 2015.(ISSN: 1755 – 9340 (Print), Scopus Indexed)
  9. Praveen, “Red - Profundity Designed for Trust Valuation in Societal Networks,” International Journal of  Advanced Research in Computer Engineering & Technology, Vol. 4, Issue 12, pp. 4297 - 4303, Dec. 2015. (ISSN: 2278 – 1323. Google Scholar Indexed, Impact Factor:3.696)
  10. Yannam Apparao and Kadiyala Laxminarayanamma, “Security Issue on “Secure Data Storage and Transaction Logs in Big Data,” International Journal of Innovative Research in Computer Science & Technology, Vol. 3, Issue 3, May 2015.(ISSN: 2347–5552, Google Scholar Indexed, Impact Factor: 2.172)
  11. Dhanalaxmi, G. Apparao Naidu, and K. Anuradha, “A Review on Software Fault Detection and Prevention Mechanism in Software Development Activities,” Journal of Computer Engineering, Vol. 17, Issue 6, pp. 25 - 30, Nov – Dec. 2015.(ISSN: 2278 - 0661(Online), ISSN: 2278–8727 (Print), Google Scholar Indexed) 
  12. Sanjeev Kumar Misra and  V. R. Seshagiri Rao “An Energy Efficient L2 Cache Architecture using Way Tag Information,” International Journal of Innovative Technology and Exploring Engineering, Vol. 3, Issue 2, pp. 0164 - 0169, June 2015.(ISSN:2278–3075, Google Scholar Indexed, Impact Factor: 3.41)
  13. V. R. Seshagiri Rao, “Semiconductor Memories and its Faults,” International Journal of Engineering & Applied Science, Vol. 5, Issue 2, pp. 420 - 426, 2015. (ISSN: 2305–8269) 
  14. Kilaru Seetaiah, Puli Bhargava, and Puli Shwetha, “Possibilities of Implementation of Synchronous Ethernet in Popular Ethernet using Timing and Interference Constraints,” Leonardo Electronic Journal of Practices and Technologies, Vol. 15, Issue 27, pp.185 - 197, 2015.(ISSN:1583–1078)
  15. Kilaru Seetaiah and Adithya Gali, "Review and Analysis of Macrocell Coverage Expansion Technologies,”Journal of Wireless Communication, Vol. 7, Issue 10, pp. 334 - 337, 2015.(ISSN: 2377-3308, Google Scholar Indexed)
  16. Seetaiah Kilaru, “Energy Efficiency in Cognitive Radio Network: Green Technology towards Next Generation Networks,” Journal of Engineering Science & Technology, Vol. 8, Issue 5, 2015. ISSN: 1823 - 4690 (Accepted)
  17. K. Nehru and A. Shanmugam, “Analysis of 16 Bit Counter using GDI Technique and CMOS Logic,” International Journal of Applied Engineering Research, Vol. 10, Issue 6, pp. 16121 - 16128, 2015.(ISSN: 0973-4562, Scopus Indexed)
  18. Seetaiah Kilaru, B. Rohith Kumar, S. Jaipal Reddy, Ch. Revanth, and M.  Sai Greeshma, “A Critical Review on the Implementation of MIMO with CSIT and CSIR,” International Journal of Information Technology. ISSN: 2281 - 2954(Online) (Under Review)
  19. J. Swarna Durga and R. Gangadhar Reddy, “Design of High Efficient Built in Self - Repair Architecture Using Mar.  Algorithm,” International Journal of Scientific Engineering and Technology Research, Vol. 4, Issue 22, pp. 4162 - 4169, July 2015.(ISSN: 2319-8885, Impact Factor: 4.162)
  20. P. Harika and J. Sravana, “Design and Implementation of Programmable Arbiter Based on Chip Permutation Network for MPSOC,” International Journal of VLSI System Design and Communication Systems, Vol. 3, Issue 4, pp. 0377 - 0381, July 2015.(ISSN: 0976 - 1357 (Online), 0976 - 1527 (Print), Google Scholar Indexed)
  21. Siddiramulu and B. Kiran Kumar, “Design of A High Speed Architecture for DDR SDRAM Controller Interfaced With AHB,” International Journal of VLSI System Design and Communication Systems, Vol. 3, Issue 5, pp. 0570 - 0575, July 2015.(ISSN: 0976 - 1357 (Online), 0976 - 1527 (Print), Google Scholar Indexed)
  22. P. Nanda Kumar and K. Ravi, “Design of Low Power CMOS Comparator in UDSM Technology,” International Journal & Magazine of Engineering, Technology, Management and Research, Vol. 2, Issue 1, pp. 212 - 217, Jan. 2015.(ISSN: 2348 - 4845 (Online), 2320 - 3706 (Print), Cite Factor Indexed, Impact Factor: 2.6250)
  23. Ch. Harshavardhan and Mary Swarnalatha, “An Advanced Embedded Banking Signature Verification with OTP,” International Journal of Engineering & Science Research, Vol. 5, Issue 7, pp. 788 - 793, July 2015.(ISSN: 2277 - 2685 (Online),  2320–9763 (Print), Google Scholar Indexed, Impact Factor: 3.47)
  24. K. Ramesh and Kalander Bhasa, “Design of Data Encoding Techniques for Reducing Energy Consumption in Network - on - Chip,” International Journal of VLSI System Design and Communication, Vol. 3, Issue 4, July 2015. (ISSN: 0976 - 1357 (Online), 0976 - 1527 (Print), Google Scholar Indexed)
  25. K. Vijay Kanth And S. Lakshmanachari, “Myoelectric Interfaces Based Assistive Robot For Human Collaborative Work,” International Journal of Professional Engineering Studies,” Vol. 5, Issue 1, July 2015. (Impact Factor: 3.825)
  26. P. Sana Roohi and G. Lakshmi Narayana, “Robust Authentication For E - Mail And Social Networking Sites,”  International Journal of Engineering & Science Research, Vol. 4, Issue 10, pp.767 - 770,Oct. 2015. (ISSN: 2277 - 2685 (Online),  2320–9763 (Print), Google Scholar Indexed, Impact Factor: 3.47)
  27. M. Annie Priyadarshini and B. Naresh, “An Accelerometer - Based Digital Pen with a Trajectory Recognition Algorithm for Handwritten Digit and Gesture Recognition,” International Journal & Magazine of Engineering, Technology, Management and Research, Vol. 2, Issue 11, pp. 372 - 377, Nov. 2015. (ISSN: 2348 - 4845 (Online), 2320 - 3706 (Print), Cite Factor Indexed, Impact Factor: 2.6250)
  28. N. Papa Rao, G. Bhavana, and M Lakshmi Ravi Teja, “RTOS Based Image Recognition & Location Finder Using GPS, GSM and OpenCV,” International Advanced Research Journal in Science, Engineering and Technology, Vol. 2, Issue 12, pp. 85 - 88, Dec. 2015. (ISSN: 2393 - 8021 (Online), 2394 - 1588 (Print), Google Scholar Indexed, Impact Factor: 3.943)
  29. S. Srikrishnan, P. K. Dash, S. Nandaraja Pillai, and S. Arunvinthan, “An Approach for Space Debris Cleaning Using Space Based Robots,” International Journal of Engineering Research And Management Research,” Vol. 2, Issue 6, pp. 51 - 54, June, 2015. (ISSN: 2349-2058, Google Scholar Indexed, Impact Factor: 2.37)
  30. P. K. Dash, B. S. Murty, and R. B. Karthik Aamanchi, “Synthesis and Mechanical Characterisation of Aluminium - Copper - Aluminia Nano Composites Powder Embedded in Glass/Epoxy Laminates,” American Journal of Nano Materials, Vol. 4, Issue 2, pp.44-51,  July 15, 2015. ISSN: 2372 - 3122 (Online),  2372 - 3114 (Print), DOI: 10.12691/ajn-3-1-4, Google Scholar Indexed)
  31. P. K. Dash and V. Divya “Experimental Studies on the Effect of Fatigue Damage of Residual Flexural Strength of Plain Wheel Bi - Directional Epoxy Composites,” Cogent Engineering, Sept. 2015. (ISSN: 2331 – 1916) (Under Review)
  32. V. Pitchi Raju, M. Manzoor Hussain, and D. Govardhan, “Effect of process parameters on the width of friction surfaced tool steel M2 deposit over low carbon steel,” International Journal of Materials Science, Vol. 11, Issue 1, pp. 1-7, Sept. 2015.  (ISSN: 0973-4589)
  33. V. PitchiRaju, M. Manzoor Hussain, and D. Govardhan, “Effect of Process Parameters on the Height of the Friction Surfaced Tool Steel M2 Deposit Over Low Carbon Steel,” International Journal of Emerging Technology and Advanced Engineering, June 2015. (ISSN: 2250–2459, Impact Factor: 2.324)
  34. V. Pitchi Raju, D. Govardhan, and M. Manzoor Hussain, “Mechanical Behavior of Rotary Friction Surfaced Aluminum Deposit on Low Carbon Steel,” International Journal of Mechanical Engineering, Vol. 8, Issue 1, pp. 17-23, July - Dec.  2015. (ISSN:  0976 – 6359 (Online), 0976 – 6340  (Print), Google Scholar Indexed, Impact Factor: 9.2286)
  35. Y. V. Kishore Kumar Nethala, and G. Sravanthi, “Multi - Disciplinary Design Optimization,” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 11, Nov. 2015. (ISSN: 2319 - 8753 (Online), 2347 - 6710 (Print), DOI: 10.15680/IJIRSET.2015.0411025, Google Scholar Indexed, Impact Factor: 6.029)
  36. C. Fazalul Rahman, and Iswarya Thiyagarajan, “The Effect of Orientation of Vortex Generators on Aerodynamic Drag Reduction in Cars, International Refereed Journal of Engineering and Science, Vol. 4, Issue 7, pp. 13 - 20, July 2015. (ISSN: 2319 - 183X (Online),   2319 - 1821 (Print), Google Scholar Indexed, Impact Factor: 2.31)
  37. T. Ishwarya, “CFD Analysis of Mini UAV for Aerodynamic Data Generation and Air Data Sensor Calibration,” International Journal of Engineering Science and Invention, 2015. (ISSN: 2319 – 6734, Google Scholar Indexed, Impact Factor: 1.786)
  38. N. Y. V. Kishore Kumar and G. Sravanthi, “Analysis of Formability on Aerospace Grade Aluminium Alloys,” International Journal of Engineering Research and Technology, Vol.  4, Issue 10, pp. 342 - 347, Oct. 2015. (ISSN: 2278 – 0181, Google Scholar Indexed, Impact Factor: 1.76)
  39. S. Srikrishnan, P.K. Dash, S. Nadaraja Pillai, and S. Arunvinthan, “An Approach for Space Debris Cleaning Using Space Based Robots,” International Journal of Engineering Research and Management, Vol. 02, Issue 06, pp. 675 - 679, June 2015. (ISSN: 2349-2058, Google Scholar Indexed, Impact Factor: 2.37)
  40. V. Pitchi Raju, D. Govardhan and M. Manzoor Hussain, “Mechanical Behaviour of Rotary Friction Surfaced Aluminum Deposit on Low Carbon Steel,” International Journal of Mechanical Engineering, Vol. 8, Issue 1, July - Dec. 2015.(ISSN:  0976 – 6359 (Online), 0976 – 6340  (Print), Google Scholar Indexed, Impact Factor: 9.2286)
  41. V. Pitchi Raju, M. Manzoor Hussain, and D. Govardhan, “Effect of Process Parameters on the Height of the Friction Surfaced Tool Steel M2 Deposit over Low Carbon Steel,” International Journal of Emerging Technology and Advanced Engineering,Vol. 5, Issue 6, pp. 241 - 245, June, 2015. . (ISSN: 2250–2459, Impact Factor: 2.324)
  42. U. S. P Rao, “Automobile Fuel Saver,” International Journal of Research in Mechanical Engineering and Technology, Vol. 5, Issue 5, pp. 43 - 45, Apr. 2015. (ISSN: 2249 - 5762 (Online),  ISSN : 2249 - 5770 (Print), Google Scholar Indexed, Impact Factor: 0.675)
  43. Shaik Shafee, B. Balu Naik, and K. Sammaiah, “Resistance Spot Weld Quality Characteristics Improvement by Taguchi Method,” International Journal, Materials Today, Vol. 2, pp. 2595 - 2604, 2015. (ISSN: 2214 – 7853, Scopus Indexed, Impact Factor: 4.359)
  44. Govardhan and K. Sammaiah, “Experimental Investigation on Friction Surface Aluminum on Mild Steel Structures” International Journal of Engineering and Research and Applications, Special Issue, pp. 56 - 60, Jan. 9 - 10, 2015. (ISSN: 2248 – 9642, Google Scholar Indexed, Impact Factor: 1.69)
  45. N N Ramesh, K Harinarayana, and B Balu Naik, “Machining Characteristics of HSS and Titanium unsing Electro Discharge Sawing and Wire -  Electrodischarge Machining” Procedia Materials Science, Vol. 2, Issue 6,  pp. 1254 - 1259, 2015. (ISSN: 2211 – 8128, Scopus Indexed)
  46. P. Sreehari Babu Velluri, A.  Jayanth kumar, and S. Chandra Lingam, “Intensity Modulated Fiber Optic Chemical Sensor - Properties of Binary Solutions of Hexadecane with 1-Butanol and 1-Heptanol,” International Journal of Innovative Science, Engineering & Technology, Vol. 2, Issue 5, pp. 800-805, May 2015. (ISSN: 2348-7968)
  47. Syed Mahboob, Rizwana and G. S. Kumar, “Modified Lorentz and Gauss Equations to Describe the Dielectric Behaviour of Sr1 - 2xNaxNdxBi4Ti4O15 Normal Ferroelectric Compounds,” Integrated Ferroelectrics, Vol. 167, Issue 1, pp. 115 - 122, 2015. (DOI: 10.1080/10584587.2015.1106901, Taylor & Francis, Impact Factor: 0.375)
  48. S. Charvani, “Preparation and Characterisation of Alumina Nanocomposites with Aramid Fibre and Hybrid Fiber Reinforcements,” International Journal of Research in Engineering and Technology, Vol. 4, Issue 3, pp. 581 - 585, Mar.  2015. (ISSN:  2319 - 1163 (Online), ISSN: 2321 - 7308 (Print), Google Scholar Indexed, Impact Factor: 3.935)
  49. Jayanth kumar, V Sreehari babu, and  S. Chandralingam, “Properties Of Chemical Bath Deposited Beryllium Chloride Thin Films Using Optical Fibre,” International Multidisciplinary Research Journal, Vol. 5 Issue 3, Sept. 2015. (ISSN: 2231 - 5063 (Print), Google Scholar Indexed)
  50. Jayanth kumar, V Sreehari babu, and S. Chandralingam, “Intensity Modulated Fiber Optic Chemical Sensor – Molar Volumes, Refractive Indices, Electronic Polarization Molar Refractions of Binary Liquids,” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 5, May 2015.  (ISSN: 2319 - 8753 (Online), 2347 - 6710 (Print), Google Scholar Indexed, Impact Factor: 6.029)
  51. Rizwana and P. Sarah P, “Structure and Properties of sol Gel Fabricated Na0.5Nd0.5Bi4Ti4O15 Ceramics,” Materials Science, Elsevier, Vol. 10, Issue 3, pp. 28 - 36, 2015. (ISSN: 0921-5093, DOI:10.1016/j.mspro.2015.06.020, Scopus Indexed, Impact Factor: 1.768)
  52. S. Charvani, Gopal Reddy, “Preparation, and Characterization of Alumina Nanocomposites with Aramid Fibre and Hybrid Fibre Reinforcements,” International Journal of Research in Engineering and Technology, Vol. 4, Issue 3, 2015. (ISSN:  2319 - 1163 (Online), ISSN: 2321 - 7308 (Print), Google Scholar Indexed, Impact Factor: 3.935) 
  53. N. Rajeswara Rao, T. Venkatappa Rao, S.V.S. Ramana Reddy, and B. Sanjeeva Rao, “The Study of Gamma Irradiation Effects on Poly (Glycolic Acid), Radiation Effects and Defects in Solids,” Plasma Science and Plasma Technology, Taylor & Francis, pp. 439-450, May 2015. (ISSN: 1009-0630, DOI:10.1088/issn.1009 – 0630, ISI Indexed, Impact Factor: 0.659)
  54. N. Rajeswara Rao, T. Venkatappa Rao, S.V.S. Ramana Reddy, and B. Sanjeeva Rao. “Effect of Electron Beam on Thermal, Morphological and Antioxidant Properties of Kraft Lignin,” Advanced Materials Letters, Vol. 6, Issue 6, pp.560 - 565, 2015. (ISSN : 0976-3961, DOI: 10.5185/amlett.2015.SMS2, Scopus Indexed, Impact Factor 0.863)
  55. N. Rajeswara Rao, T. Venkatappa Rao, S.V.S. Ramana Reddy and B. Sanjeeva Rao, “The Effect of Gamma Irradiation on Physical, Thermal and Antioxidant Properties of Kraft Lignin,” Journal of Radiation Research and Applied Sciences, Elsevier, Vol. 8, 2015. (ISSN: 1687 – 8507, http://dx.doi.org/10.1016/j.jrras.2015.07.003, Scopus Indexed, Impact Factor: 0.693)
  56. V. Anitha Rani and Y. Bharthi Kumari, “Green Synthesis of (Z) - N - 5 - (Benzylidene/Substituted Benzylidene) - 2 - Benzamido - 3 - (Methyl/Phenyl) - 6 - oxo - 1, 2, 5, 6 - Tetrahydro - 1, 2, 4 - Triazines and Their Anti - Bacterial Activity,” Afro Asian Journal of Chemistry, Vol. 1, Issue 2, pp. 134 - 142, 2015. (ISSN: 2349 – 4964)
  57. Chillara Somashekar, “A Hydromagnetic Sverdrup Relation in a Stress Driven Conduction using Baroclinic Model,” International Journal of Scientific and Innovative Mathematical Research, Vol. 3, Issue 2, pp. 686 - 689, July 2015. (ISSN:  2347 - 3142 (Online), 2347 - 307X (Print), DAIG Indexed)
  58. Chillara Somashekar, “A Hydromagnetic Sverdrup Relation in A Stress Driven Conduction Using Baroclinic Model,” International Journal of Scientific and Innovative Mathematical Research, Vol. 3, Issue 2,  pp. 686 - 689, July 2015. (ISSN:  2347 - 3142 (Online), 2347 - 307X (Print), DAIG Indexed)
  59. P. Sridhar, V. Purna Chandra Rao, and B.P. Singh, “Eradication of Harmonics by Using Optimal Placement of Improved Numerous Distributive Active Compensation Scheme,” International Journal of Industrial Electronics, Control and Robotics,  Vol. 04, Issue 01, pp. 13 - 21, Jan.  -  June, 2015. (ISSN: 2231 – 4903)
  60. P. Sridhar, V. Purna Chandra Rao, and B.P. Singh, “Enhancement of Power Quality Using Active Compensation Scheme under Ideal/Non - Ideal Source Voltage”, Institution of Electronics and Telecommunication Engineers Journals, (Co published by Taylor & Francis) – June 2015.  (ISSN: 0974 - 780X (Online),  0377 - 2063 (Print)  (in press))
  61. P Sridhar, V Purna Chandra Rao, and B P Singh, “ANN Based Series Fault Locator in Transmission System,” International Journal of Industrial Electronics, Control & Robotics, Vol. 4, Issue 1, pp. 1 - 5, Jan.  -  Jun. 2015. (ISSN: 0974 – 2220)
  62. Naresh Kumar and K. Lingaswamy, “Six Phase Transmission Line Series Fault Locator using Artificial Neural Network,” International Journal of Engineering Research & Technology, pp. 192 - 196, 2015. (ISSN: 2278-0181, Google Scholar Indexed, Impact Factor: 1.76)
  63. P. Sridhar, V. Purna Chandra Rao, and B. P. Singh, “Mitigation of Fault in 5 Bus System With Switch Type Voltage Controlled FCL,” Microelectronics, Electromagnetics and Telecommunications, Volume 372 of the series Lecture Notes in Electrical Engineering, pp. 291 - 304, Dec. 2015. (ISBN 978-81-322-2728-1)

Conference Publications

  1. P. R. Anisha, C. Kishor Kumar Reddy, and L. V. Narasimha Prasad, “A Pragmatic Approach for Detecting Liver Cancer using Image Processing and Data Mining Techniques,” IEEE International Conference on Signal Processing and Communication Engineering Systems,  Guntur, India, pp. 352 – 357, Jan. 2015. .  (ISBN: 978-1-4799-6108-5, DOI: 10.1109/SPACES.2015.7058282)
  2. C. Kishor Kumar Reddy, L. V. Narasimha Prasad, and G. V. S. Raju, “Revealing of  Earth Quake Magnitude using Seismic Signals and Wavelet Transforms,” International Conference on Soft Computing and Software Engineering, California, USA, pp. 619 - 627, Mar. 5 - 6, 2015. (ISSN: 1877-0509, DOI: 10.1016/j.procs.2015.08.562, Elsevier Proceedings)
  3. C. Kishor Kumar Reddy, L. V. Narasimha Prasad, and D. Shobha Rani, “Satellite Derived pH Estimation for Acidity in Precipitation using Water Vapor and Nitrogen Dioxide Imagery,” International Conference on Soft Computing and Software Engineering, California, USA, pp. 637 - 648, Mar. 5 - 6, 2015. . (ISSN: 1877-0509, DOI: 10.1016/j.procs. 2015.08.591, Elsevier Proceedings)
  4. Yannam Apparao and Kadiyala Laxminarayanamma, “Data Management Environment with Data Warehousing for Big Data Architecture, International Conference on Innovations in Computer Science and Engineering, Hyderabad, India, Aug. 7 - 8, 2015.
  5. B. Jyothi, Y. Madhavee Latha, P.G. Krishna Mohan, and V.S.K. Reddy, “Region Based Texture Descriptor for Content Based Medical Image Retrieval Using Second Order Moments,” International Conference on Innovations in Information Embedded and Communication Systems, Myleripalayam, Coimbatore, Tamilnadu, India, Mar. 19 - 20, 2015. (ISBN: 978-1-4799-6817-6, DOI: 10.1109/ICIIECS.2015.7193026)
  6. P. Sridhr, V. Purna Chandra Rao, and B. P. Singh, “Mitigation of Fault in 5 Bus System with Switch Type Voltage Controlled FCL,” International Conference on Micro-Electronics, Electromagnetics and Telecommunications, Visakhapatnam, India, 18 – 19 Dec.  2015.
  7. P. Sridhar, V. Purna Chandra Rao, andB. P. Singh, “A Decisive Evaluation of SRM Drive for Industrial Applications with High Power Factor Correction Capabilities,” International Conference on Control System and Power Electronics, Bangalore, India, 1 – 2 Aug.  2015. (ISI Indexed)
  8. B. Jyothi, Y. Madhavee Latha, and P.G. Krishna Mohan, “Multidimensional Feature Space for an Effective Content Based Medical Image Retrieval,” IEEE International Advance Computing Conference, Banglore, India, June 12 - 14, 2015. (ISBN: 978-1-4799-8047-5, DOI: 10.1109/IADCC.2015. 7154670)
  9. B. Jyothi, Y. Madhavee Latha, and P.G. Krishna Mohan, “Steerable Texture Descriptor for an Effective Content - Based Medical Image Retrieval System Using PCA,” International Conference on Computer and Communication Technologies, Vol. 379 of the series Advances in Intelligent Systems and Computing, pp. 289 - 298,  Sep. 5,  2015. (ISSN: 2194-5365, ISBN: 978-81-322-2516-4, DOI: 10.1007/978-81-322-2517-1)
  10. B. Jyothi, Y. Madhavee Latha, and P.G. Krishna Mohan, “An Effective Multiple Visual Features for Content Based Medical Image Retrieval,” IEEE International Conference on Intelligent Systems and Control, Myleripalayam, Coimbatore, Tamilnadu, India, pp. 1 - 5, Jan. 9 - 10, 2015. (ISBN: 978-1-4799-6480-2, DOI: 10.1109/ISCO.2015.7282301)
  11. B. Jyothi, Y. Madhavee Latha, and P.G. Krishna Mohan, and V.S.K. Reddy, “Medical Image Retrieval Using Multiple Features Clustering Technique,” IEEE International Conference on Computational Intelligence and Computing Research, Maduri, Tamilnadu, India, Dec. 10 - 12, 2015. (ISBN: 978-1-4799-7849-6, DOI: 10.1109/ICCIC.2012.6510257)
  12. Seetaiah Kilaru and Raviteja Gali “Mean and Edge Capacity Optimization of Relay Deployment in Outdoor Environment,” IEEE International Conference on Green Engineering and Technologies, Coimbatore, Coimbatore, Tamilnadu, Nov. 27, 2015. (ISBN: 978 - 1 - 4673 - 8625 – 8)
  13. Kilaru Seetaiah, P. Bhargav, D. Raman, and P. Shwetha, “Improving Spectral Efficiency of Massive MIMO Network for Next Generation 5G Wireless Network,” IEEE International Conference on Green Engineering and Technologies, Coimbatore, Coimbatore, Tamilnadu, Nov. 27, 2015. (ISBN: 978 - 1 - 4673 - 8625 – 8)
  14. Kilaru Seetaiah and Adithya Gali, “Review on Hand - off Analysis of Femto Cell and Implementation of IMS Registration Process,” IEEE International Conference on Green Engineering and Technologies, Coimbatore, Coimbatore, Tamilnadu, Nov. 27, 2015.  (ISBN: 978 - 1 - 4673 - 8625 – 8)
  15. Seetaiah Kilaru, S. Padmaja, and Venugoal Reddy “Investigation and Analysis of Energy Efficiency in Distributed Antenna System: Technology towards Green Communications,” International Conference on Signal, Networks, Computing, and Systems, New Delhi, India, 25 - 27 Feb. 2016. (Accepted)
  16. Seetaiah Kilaru, M. Ramesh Babu, and K. Nehru, “Envelope Correlation Coefficient Reduction in MIMO Receiver Design for LTE 10 Frequency Bands,” International Conference on Soft Computing System, Noorul Islam Centre for Higher Education, Kumaracoil, Tamilnadu, Feb.  19 - 20, 2016. (Under Review)
  17. R. Gangadhar Reddy, “High Speed and Ultra Low Power Driving Buffer Amplifier for LCD Applications,” International Conference on Current Research in Emerging Trends of Management, Arts, Science, Technology, and Skill Development, Alwar, Rajastan, Dec. 18 - 19, 2015.
  18. P. K. Dash, “Fatigue Damaged Residual Flexure Strength of Plain Wave Bidirectional Carbon/Epoxy Composite: An Experimental Study,” International Conference on Fatigue, Durability and Fracture, Bangalore, India, May 30, 2015.
  19. D. Govardhan and K. Sammaiah, K.G.K .Murti, and G. Madhu Sudhan Reddy, “Evaluation of Bond Quality for Stainless Steel - Low Carbon Steel Friction Surfaced Deposit,”   International Conference on Material Characterization and Processing, Hyderabad, India, Mar. 14 - 15, 2015.(DOI: 10.1016/j.matpr.2015.07.327)
  20. V. Pitchi Raju, M. Manzoor Hussain, and D. Govardhan, “Effect Of Process Parameters On Surface Roughness of Tool Steel M2 Deposit Over Low Carbon Steel Produced By Friction Surfacing,” IRF International Conference,pp. 70 - 74, Chennai, India, July 2015.(ISBN: 978 - 93 - 85465 - 63–5)
  21. Amalesh Barai, “Role of Fluid Dynamics on Aeroelastic and Other Solid Fluid Interaction Problems,” All India Seminar on Civilian Applications of Aerospace Technologies, Hyderabad, Mar. 27 - 28, 2015.
  22. E. Madhusudan Raju, L. Siva Rama Krishna, Y. Sharath Chandra Mouli, and V. Nageswara Rao, “Effect of Link Flexibility on tip Position of a Single Link Robotic Arm,” International Conference on Vibration Problems, Warangal. India, Feb. 18-19, 2015. (DOI: dx.doi.org/10.1088/1742 - 6596/662/1/012020)
  23. J. S. R. Prasad, Y. Singh, R. Deoliya, and M. V. Ravibabu, “Remote Sensing and GIS Application for Earthquake Risk Assessment of Rural Areas,” National Conference on GIS Applications in Disaster Management, Hyderabad, Mar. 9 - 11, 2015.
  24. D. Govardhan K. Sammaiah, K.G.K .Murti, and G. Madhu Sudhan Reddy, “Evaluation of Bond Quality for Stainless Steel - Low Carbon Steel Friction Surfaced Deposit,”   International Conference on Material Characterization and Processing, Hyderabad, India, Mar. 14 - 15, 2015. (DOI: 10.1016/j.matpr.2015.07.327)
  25. V. Pitchi Raju, M. Manzoor Hussain, and D. Govardhan, “Effect of Process Parameters on Surface Roughness of Tool Steel M2 Deposit Over Low Carbon Steel Produced by Friction Surfacing,” IRF International Conference,Chennai, India, pp. 70 - 74, July 2015. (ISBN: 978 - 93 - 85465 - 63 – 5)
  26. U. S. P. Rao, “Selection of Welding Process for Aero Space Application,” National Conference on Advances in Mechanical Engineering, pp. 1 - 5, May 1 - 2, 2015.
  27. D. Govardhan, K. Sammaih, KGK Murti, and G. Madhusudhan Reddy, “Evaluation of Bond Quality for Stainless Steel -  Carbon Steel Friction Deposits,” International Conference on Materials Processing and Characterisation, Hyderabad, pp. 99 - 103, Mar. 2015. (DOI: 10.1016/j.matpr.2015.07.327)
  28. Y. Shivraj Narayan, N. N. Ramesh, B. Balu Naik, and A. Ramya, “Realization of Surface Morphology and Process Parameter Optimization in MicroEDM Hole Drilling of Maraging Steel 300 Alloy,” International Mechanical Engineering Congress &Expositon, Houston, Texas, USA, pp 1 - 4, Nov. 13 - 19, 2015. (DOI:10.1115/IMECE2015-53537)
  29. KGK Murti, “Selection of Welding for Aero - Space Applications,” National Conferecne on Advances in Mechanical Engineering, Hyderabad, India, pp. 1 - 5, May 1 - 2, 2015.
  30. J. Suresh Goud, “Steady Flow between A Rotating Disk Having Non - Erodiblr Porouslining and A Stationary Disk with Suction,” National Seminar, Sri Venkateswara University, Tirupati, 13 - 15 July 2015.
  31. Chillara Somashekar, “A Hydromagnetic Sverdrup Relation in a Stress Driven Conduction Using Baroclinic Model,” International Conference on Mathematical Sciences, Tirupati, India, July 13 - 15, 2015. ISSN:  2347 - 3142 (Online), 2347 - 307X (Print)
  32. S. Vathsal, “HDL Design for High Speed Multi Channel RPRBS - GPS SOC Transceiver for Data Acquisition and Tracking Using Satellites Based Ultra High Speed GPS Mobile Computing System,” and IEEE copyright notice: 978 - 1 - 4799 - 7678 - 2/15/$31, 2015. ISBN: 978 - 1 - 4799 - 7676 - 8
  33. P. Sridhar, Md. Sajid, K Shashidhar Reddy, B.P. Singh, and M Surya Kalavathi, “Frequency Response and Coherence Function Analysis for Detection of a Single Turn Fault in the Line End Coil of 11 kV Motor,” National Power Engineering Research Scholars' Meet (NPERSM), IIT Madras, Dec. 29 - 30, 2015.

1 January, 2014 to 31 December, 2014

Journal Publications

  1. L V Narasimha Prasad, Mannava Munirathnam Naidu, and K. Prudhvi Kumar Reddy, “Model Relating Humidity and Intensity of  Satellite Infrared Imagery for Global Precipitation Now Casting,” International Journal of  Hydrology Science and Technology, Inderscience, Vol.4, Issue 4, pp. 310 - 335, 2014. (ISSN: 2042-7816 (Online), 2042-7808 (Print), DOI: http://dx.doi.org/10.1504/IJHST.2014.068447, Scopus Indexed, Impact Factor: 0.40)
  2. Madhuri Avula, L V Narasimha Prasad, and Murali Prasad Raja, “Detection of Bone Cancer Using Region Growing And Mean Pixel Intensity Threshold,” International Journal of Soft Computing, Vol. 2, Issue 4, pp. 67 - 72, 2014.  (ISSN: 2251-7545 (Online), Scopus Indexed)
  3. L V Narasimha Prasad and Munirathnam Naidu Mannava, “CC - SLIQ: Performance Enhancement With 2k Split Points in SLIQ Decision Tree Algorithm,” IAENG International Journal of Computer Science, Vol. 41, Issue 3, pp.163 - 173, 2014.  (ISSN: 1819-9224 (online); ISSN: 1819-656X (Print), Scopus Indexed)
  4. Naveen Dondapati, K. Prudhvi Kumar Reddy, and L V Narasimha Prasad, “Estimating Acidity in Precipitation Using Sulphur Dioxide Satellite Imagery,” International Journal of  Soft Computing and Software Engineering, Vol. 4, Issue 3,  pp. 56 - 67, 2014. (ISSN: 2251-7545, DOI: 10.7321/jscse.v4.n3.2, Scopus Indexed)
  5. C. Kishor Kumar Reddy, P R Anisha, L V Narasimha Prasad, and B. VijayaBabu, “Comparison of  Haar, db, sym and coif Wavelet Transforms in the Detection of  Earthquakes Using Seismic Signals,” International Journal of  Applied Engineering Research, Vol. 9,  pp. 5439 - 5452, 2014. (ISSN 0973-9769 (Online), ISSN: 0973-4562 (Print), Scopus Indexed)
  6. M. Bhanuvardhan Reddy and R.V. Krishnaiah, “Psychological Parameter Monitoring System for Patient And Doctors Interface,” International Journal of  engineering Research and Technology, Vol. 3, Issue 1, pp. 213 - 217, Jan. 2014. (ISSN: 2278 - 0181 (Online), Google Scholar Indexed, Impact Factor: 1.76)
  7. T. Amardeep and R.V. Krishnaiah, “Public Linear Programming Solution for The Design of Secure And Efficient Computing in Cloud,” International Journal of Electronics and Computer Science Engineering (IJECSE), Vol. 2, pp. 1081 - 1092, Nov. 4, 2014. (ISSN: 2277-1956, IOAJ Indexed, Impact Factor: 0.765)
  8. Gurram Sunitha and A. Rama Mohan Reddy, “A Birds Eye View on Mining Sequential Patterns from Traditional Databases,” International Journal of  computing and Technology, Vol. 1, Issue 10, pp. 512 - 519, Nov. 2014.  (ISSN : 2348  -  6090)
  9. Gurram Sunitha and A. Rama Mohan Reddy, “A Region - Based Framework for Mining Sequential Patterns from Spatio - Temporal Event Databases,” International Journal of  Applied Engineering Research, Vol. 9, Issue 24, pp.28161 - 28175, 2014. (ISSN 0973-9769 (Online), ISSN: 0973-4562 (Print), Scopus Indexed)
  10. Gurram Sunitha and A. Rama Mohan Reddy, “A Grid –Based Algorithm for Mining Spatio - Temporal Sequential Pattern,” International Journal of Review on Computers and Software, Vol. 9, Issue 4, pp. 659 - 666. 2014. (ISSN: 1828-6011 (Online), Scopus Indexed, Impact Factor: 0.399)
  11. Gurram Sunitha and A. Rama Mohan Reddy, “Mining Frequent Patterns from Spatio - Temporal Data Sets: A Survey,” Journal of  Theoretical and Applied Information Technology, Vol. 68, No. 2, pp. 265 - 274, Oct. 2014. (ISSN: 1992-8645, Scopus Indexed)
  12. B. Padmaja and G. Ramesh, “Prostate Histopathology Image Classification Using Neural Network Process and Tumor Detection,” International Journal of Computer Science and Technology, Vol. 5, Issue. 3, pp. 567 - 570, July – Sept. 2014. (ISSN: 1860-4749 (Online, ISSN: 1000-9000(Print), Scopus Indexed, Impact Factor:0,475)
  13. B. Lavanya and B. Padmaja, “A Novel Approach for Identification of Forest Fires Using Land Surface Temperature Images,” Journal of Computer Engineering, Vol. 16, Issue. 5, pp. 78 - 83, Oct. 2014. (ISSN: 2278 – 0661(Online), ISSN: 2278 – 8727 (Print), Google Scholar Indexed)
  14. Sai Divya Kalagatla, K. Chandra Babu, and Y. Mohana Roopa, “Design and Implementation of  Life Insurance Assets Management Methods Using Create Insurance System,” International Journal of  Engineering & Technology Innovations, Vol.1, Issue 1, pp. 22 - 27, Jan. 2014. (ISSN: 2348 – 0866 (Online))
  15. N S Prasad and Y. Mohana Roopa, “Hybrid Algorithm Based Whole Test Suit Generation,” International Journal of Computational Science and Engineering, Vol.  2, Issue 7, pp. 46 - 50, July 2014. (ISSN: 1742 - 7193 (Online), 1742 - 7185 (Print), Scopus Indexed)
  16. Y. Mohana Roopa and A. Rama Mohan Reddy, “SPARROW Algorithm for Clustering Software Components,” International Journal of Environmental Research and Development, Vol. 10, Issue 6, pp. 20-24, June 2014. ISSN: 2278 - 067X (Online), 2278 - 800X (Print), Google Scholar Indexed. Impact Factor: 1.458)
  17. V. N. S. Vempati Vamsi Krishna, N. Chandra Sekhar Reddy, and N. V. Krishna Rao, “Securing Data packets from Vampire Attacks in Wireless ad - hoc Network using Distance Vector Protocol,” WorldJournal of Engineering Science, Vol. 2, Issue 3, pp.79 - 86, June 2014. (ISSN: 2320 - 9801 (Online),  ISSN: 2320 - 9798 (Print), Copernicus Indexed, Impact Factor: 2.84)
  18. M. Sujitha, N. Chandra Sekhar Reddy, and N. V. Krishna Rao, “Balancing the Load in Distributed File Systems with Cloud Computing,” International Journal of Computer Science and Information Technology, Vol. 5, Issue 2, pp. 1023 - 1027, Apr. 2014. (ISSN: 2229 – 4333, Google Scholar Indexed, Impact Factor: 0.675)
  19. K. Srinivas and P. Ravinder, “A Multilevel SWT and DWT Transform from Image Resolution Enhancement,” International Journal of Scientific Engineering and Technology Research, Vol. 3, Issue 23, pp. 4583 - 4586, Sept. 2014. (ISSN: 2319-8885, Impact Factor: 4.162)
  20. S. Himaja, N. Chandrashekar Reddy, and S. Srinivas,” Secured Tagging Refining Spam Detection,” Journal of  Computer Science and Engineering, pp. 19 - 22, Mar. - Apr. 2014. (ISSN: 2278 - 0661 (Online), 2278 - 8727 (Print), Google Scholar Indexed)
  21. N. Alekhya, N Chandrashekar Reddy, and S Srinivas, “Detection of Local Intrusion to Avoid Damage of Global Effects,” International Journal of engineering and science, Vol. 3, Issue 6, pp.23 - 26, June 2014. (ISSN: 2319 - 1813 (Online), 2319 - 1805 (Print), Google Scholar Indexed)
  22. G. Swaapnika, N. Chandra Sekhar Reddy, and S. V. S. Hanumanth Rao, and I. Surya Prabha, “Health Diagnosis Using WBAN Technology,” Journal of  Computer Engineering, Vol. 16, Issue 3, pp. 06 - 09, May 2014(ISSN: 2278 - 0661 (Online), 2278 - 8727 (Print), Google Scholar Indexed)
  23. Kanamala Suresh, N. Chandra Sekhar Reddy, and S. V. S. Hanumanth Rao, “Enhancing the Data Collection to Reduced Interference in Tree Based ad - hoc Sensor  Network,” International Journal of  Computer Science Information and Engineering & Technologies, Vol. 11, pp. 45 - 49, May 2014. (ISSN: 2277-4408)
  24. M. Geetha Yadav, N. Chandra Sekhar Reddy, and G. Praveen Babu, “Cryptographic Cloud Storage with Data Sharing and Security for Multi Access Network,” International Journal for Development of Computer Science & Technology, Mar. 2014. (ISSN: 2320 - 7884 (Online), 2321 - 0257 (Print), Google Scholar Indexed, Impact Factor: 0.675)
  25. P. Navya and B. Venkata Krishna, “Secure and Preserving Social Networking Data in Clouds,” International Journal of Computer Science Information and Engineering Technologies, Vol. 3, Issue 1, pp.1 - 8, 2014. (ISSN 2277 – 4408)
  26. K. Mayuri and K.S. Ranjith, “A Novel Secure Handover Mechanism in PMIPV6 Networks,” International Journal of Information Technology Convergence and Services, Vol. 4, Issue 4, Aug. 2014. (ISSN: 2231 – 1939, DOI:10.5121/ijitcs.2014.4401, Google Scholar Indexed)
  27. K. Aparna, N. Chandra Sekhar Reddy, I. Surya Prabha, and K. Venkata Srinivas, “Disease Prediction in Data Mining Techniques,” International Journal of Computer Science and Technology (IJCST), 2014. (ISSN : 0976 - 8491 (Online), ISSN: 2229 - 4333 (Print), Google Scholar Indexed)
  28. Madhuri Avula, L V Narasimha Prasad, and Murali Prasad Raja, “Detection of Bone Cancer Using Region Growing and Mean Pixel Intensity Threshold,” International Journal of Soft Computing, 2014.  (ISSN: 2251-7545 (Online), Scopus Indexed)
  29. B. Kavya, R. Ravinder Reddy, and Y. Ramadevi, “A Survey on SVM Classifiers for Intrusion Detection,” International Journal of Computer Applications, Vol. 98, No. 19, pp. 38 - 44, July 2014. (ISSN: 0975 – 8887, Google Scholar Indexed)
  30. E. Uma shankari, “Multi - Cloud Storage Data Possession Based Data Integrity Verification and Security Cooperative Schedule,” International Journal of Scientific Research and Education, Vol. 2, Issue 10, pp. 2019-2026, Oct. 2014. (ISSN: 2321 – 7545,, Google Scholar Indexed, Impact Factor: 5.169)
  31. Swapna, “Data Sharing in Webhosting for Business Events and Temporal Constraints in Service Engagements, “International Journal of Scientific Engineering and Technology Research, Vol. 3, Sep 2014. (ISSN: 2319-8885, Impact Factor: 4.162)
  32. V. R. Seshagiri Rao, “Built in Self Repair For Semiconductor Memories,” International Journal of Engineering and Applied Sciences, Vol. 04, Issue 4, pp. 129 - 134, 2014. (ISSN: 1819-6608)
  33. V. R. Seshagiri Rao, “Semiconductor Memories and its Faults,” International Journal of Engineering & Applied Science, Vol. 5, Issue 2, pp. 420 - 426, 2014. (ISSN: 1819-6608)
  34. P. G. Krishna Mohan, “Plug Load Monitoring over Various Devices to Implement Energy Conservation,” International Journal of Science, Engineering and Technology Research, Vol. 3, Issue 9, pp.2536 - 2538, Sept. 2014. (ISSN: 2278 - 7798 (Online), Google Scholar Indexed, Impact Factor: 3.59)
  35. Nagandla Suman, P. Kesavarao, K. Prasanth Kumar, “Identity-Based Secure Distributed Data Storage Schemes,” International Journal of Engineering Research, Vol. 2, Issue 5, pp. 81 - 87, 2014. (ISSN: 2321-7758, Scopus Indexed, Impact Factor: 0.392)
  36. L. J. V. Kumar, J. K.  Kishore, and P. Kesava Rao,   “Decomposition Methods for Detection of Oil Spills Based on RISAT-1 SAR Images,” International Journal of Remote Sensing and Geoscience, Vol. 3, Issue 4, pp. 1-10, July 2014. (ISSN: 2319-3484, Copernicus Indexed, Impact Factor: 1.7)
  37. L. J. V. Kumar, J. K.  Kishore, and P. Kesava Rao,   “Oil Spill Map for Indian Sea Region Based on Bhuvan-Geographic Information System Using Satellite Images,” International Society for Photogrammetric and Remote Sensing (ISPRS), Vol. XL-8, pp. 1085-1090, Dec. 2014. (ISSN: 0924-2716, DOI:10.5194/isprsarchives-XL-8-1085-2014)
  38. Asma Jabeen, and D. Khalandar Basha, “Elimination Glitch Power Consumption at P.D. Stage in CMOS Circuits,” International Journal for Electrical, Electronics and Communication Engineering, Vol. 7, Issue 30, pp. 651 - 656, Sep. 2014. (ISSN: 2231-3346 (Online), 2319-2232 (Print), Google Scholar Indexed, Impact Factor: 3.896)
  39. Korukonda Sailesh and S. Ranjitha, “Implementation of Assertion Based Verification (ABV) Algorithm for DDR Memory Cores,” International Journal of VLSI Design and Communication Systems, Vol. 2, Issue 09, pp. 0933 - 0936, Nov.  2014. (ISSN: 0976-1357 (Online), 0976-1527 (Print), Google Scholar Indexed)
  40. G. Ajitha, “Robust Railway Crack Detection Using LED-LDR Assembly,” International Journal of Advanced and Innovative Research, Vol. 6, pp. 120 - 124, 2014. (ISSN: 2278-7844, Impact Factor:0.349)
  41. G. Ajitha, “Implementation of Embedded Intelligent Home Control System,” International Journal of Scientific Engineering and Technology, Vol. 3, pp. 4029 - 4031, 2014. (ISSN: 2277-1581, ISBN: 978-81-932091-1-0, DOI: http://dx.doi.org/10.17950/ijset, Google Scholar Indexed)
  42. Kiran Kumar Reddy and B. Naresh, “E-Restaurant using Embedded System,” International Journal of Science, Engineering and Technology Research, Vol. 5, 2014. (ISSN: 2278-7798 (Online), Google Scholar Indexed, Impact Factor 3.59)
  43. P. Lakshmi Sowjanya and B. Naresh, “Design of Remote Video Monitoring and Motion Detection System,” International Journal of Review in Electronics & Communication Engineering, Vol. 2, Issue 4, pp. 132 - 135, Aug. 2014. (ISSN: 2321-3159 (Online), 2321-3140 (Print), Impact Factor: 2.677,       Google Scholar Indexed)
  44. CH. Vikas and F. K. Pavan Kumar, “Implementation of Adaptive Biased Operational Amplifier with Improved Slew-Rate,” International Journal of VLSI Design and Communication Systems, Vol. 02, Issue 10, pp. 1064 - 1068, Nov. 2014. (ISSN: 0976-1357 (Online), 0976-1527 (Print), Google Scholar Indexed)
  45. D. Loknathreddy, O. Sudhakar, and V. Sailaja, “An Enhance in Transient Response of LMS Adaptive Filter,” International Journal of Electronics Communication and Computer Engineering, Vol. 3, Issue 5, 2014. (ISSN: 2249–071X (Online), ISSN: 2278–4209 (Print), Impact Factor: 2.7, Google Scholar Indexed)
  46. P. Sana Roohi and G. Lakshmi Narayana, “Robust Authentication for E-Mail and Social Networking Sites,” International Journal of Engineering and Science Research, Vol. 4, Issue 10, pp. 767 - 770, Oct. 2014. (ISSN: 2277-2685 (Online), 2320–9763 (Print), Google Scholar Indexed, Impact Factor: 3.47)
  47. G. Mary swarna Latha and P. Naga Malliswari, “Pollution Check in Vehicles and Send Alert through GSM with a Location Identifier,” International Journal of Professional Engineering Studies, Vol.  4, Issue 3, pp. 181 - 183, Nov. 2014. (Impact Factor. 3.825)
  48. M. Kadir, “Adaptive Biased Operational Amplifier with Amplifier with Improved Slew Rate,” International Journal of Embedded & VLSI System, Vol. 3, Issue 10, Oct. 2014. ISSN: 2249 – 6556
  49. N. Papa Rao and Ran Dev “ARM7 Based Driver Behaviour Model with Stability in The Presence of Driver Uncertainty,” International Journal of Advanced Technology and Innovative Research, Vol. 6, Issue 9, Oct. 2014. (ISSN : 2348-2370, Impact Factor: 3.946)
  50. K. Deepa and N. Papa Rao, “Online Secure for Tourist Attraction,” International Journal of Professional Engineering Studies,” Vol. 4, Issue 1, pp. 149 - 152, Oct. 2014. (Impact Factor: 3.825)
  51. B. Kiran Kumar and A. Naveen, “Design of Low Power 10T and 14T Full-Adder using Dual Gate,” International Journal of Scientific Engineering Technology and Research,” Vol. 03, Issue 33, pp. 6631 - 6636, Oct. 2014. (ISSN: 2319-8885, Impact Factor: 4.162)
  52. Lavanya, “Design of Intelligent Mobile Human Recognition and Location Identification System Based On ARM7 And Opencv,” International Journal of Emerging Engineering Research and Technology, Vol. 2, Issue 8, pp. 1 - 7, Nov. 2014. (ISSN: 2349-4409 (Online), 2349 –4395 (Print), Google Scholar Indexed, Impact Factor: 1.222)
  53. S. Vathsal, “Portable Camera Based Label Reader for Blind People,” International Journal of Electrical Electronics and communication, Vol. 6, Issue 20, Oct. 2014. (ISSN: 2319 – 2518)
  54. S. Aruna and Srikar Kantam, “A High Resolution, Low off-Set Voltage And Gain Stability Comparator,” Progress in Science and Engineering Research Journal, Vol. 02, Issue 4, pp. 29 - 31, Jul. 2014. (ISSN: 2347-6680 (Online), Impact Factor: 2.565, Google Scholar Indexed)
  55. P. Shiva Kumar, “Harmonic Mitigation In 18 - Pulse AC - DC Converter With Direct Torque Control of Three Phase Induction Motor,” International Journal of Electrical Engineering, Vol. 11, pp. 12 - 20, 2014. (ISSN: 0974 – 2158)
  56. Nareshkumar, “Series (Open Conductor) Fault Distance Location in Three Phase Transmission Line Using Artificial Neural Network,” International Journal of Scientific Research Engineering & Technology, Vol. 3, Issue 7, Oct. 2014. (ISSN: 2278 – 0882, Google Scholar Indexed, Impact Factor: 1.24)
  57. A, Sathish Kumar, “A Novel Single Phase Inverter Using Soft Switching Boost Converter,” International Journal of Engineering Research and Technology, Vol. 4, Issue 1, Oct.  2014. (ISSN: 2278 – 0181, Google Scholar Indexed, Impact Factor: 1.76)
  58. D. Kumar, “Optimal Location of UPFC by Using Modified Particle Swarm Optimization for Voltage Stability,” The International Journal of Science and Technology, Vol. 2, Issue 11, 2014. (ISSN: 2321 919X, Copernicus Indexed)
  59. D. Govardhan, “Determination of Weld Loads by Using Design of Experiments for Low Carbon Steel Sheet for Automobile Applications, International Journal of Emerging technology and advanced Engineering, Vol.  4, Issue 2, pp. 606 - 612, Feb. 2014. (ISSN: 2250–2459, Impact Factor: 2.324)
  60. Barai, “Design and Analysis of Aircraft Bomb Release Mechanism Using Finite Element Method,” Defence science journal, DRDO, 2014.
  61. Y. B. Sudhir Sastry, Y. Krishna, Anirudh Koduganti,  “Flexural Buckling Analysis of Thin Walled Lipped Channel Cross Section Beams With Variable Geometry,” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 6, pp. 213 - 217, June 2014.  (ISSN: 2319 – 8753, Google Scholar Indexed. Impact Factor: 6.2)
  62. L. Ramanan, M. Kumar and KPV Ramanakumar, “Six Sigma DMAIC Framework for Enhancing Quality in Engineering Educational Institutions,” International Journal of Business and Management Invention, Vol. 3, Issue 1, pp. 36 - 40, Jan. 2014. (ISSN: 2319 - 8028 (Online), ISSN: 2319 – 801X (Print))
  63. Y. B. Sudhir Sastry, Y. Krishna, R. Budarapu Pattabhi, and Anirudh Koduganti,  “Flexural Buckling Analysis of Thin Walled T Cross Section Beams With Variable Geometry,” International Journal of Engineering Research and Technology, Vol. 2, pp. 256 - 260, 2014. (ISSN: 2278 – 0181, Google Scholar Indexed, Impact Factor: 1.76)
  64. Y. B. Sudhir Sastry, Y. Krishna, R. Budarapu Pattabhi, and Anirudh Koduganti, “Flexural Buckling Analysis of Thin Walled Lipped Channel Cross Section Beams With Variable Geometry,” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 1, No. 1, pp. 146 - 150, 2014. (ISSN: 2319 - 8753 (Online), 2347 - 6710 (Print), Google Scholar Indexed, Impact Factor: 6.029)
  65. L. Ramanan, M. Kumar and KPV Ramanakumar, “Six Sigma Methodology for Addressing Employability Issue of Engineering Graduates,” International Journal of Modern Education Forum, Vol. 3, Issue 2, pp. 59 - 66, May, 2014. (ISSN: 2324 - 6944 (Online), 2324 - 6928 (Print), Google Scholar Indexed)
  66. Somaiah, M. Indira Rani, and Ch. Varun Kumar, “Particle Swarm optimization Algorithm foe Machine Loading Problem in FMS,” Indian Journal of Applied Research , Vol. 4, Issue 8,  pp 261 - 263, Aug. 2014. (ISSN: 2249 - 555X, Google Scholar Indexed)
  67. Shaik Shafee, B. Balu Naik, K. Sammaiah,  Mohd Mohinoddin, “Influence of Welding Parameters on Nugget Formation in RSW Process,” International Journal of Emerging Technology and Advanced Engineering, Vol 4 Issue 6, pp. 906 - 912, June 2014.  (ISSN: 2250–2459, Impact Factor: 2.324)
  68. Shaik Shafee, B. Balu Naik, K. Sammaiah, and Mohd Mohinoddin, “RSW Process Parameters Optimisation by Taguchi Method,” IOSR Journal of Mechanical and Civil Engineering, Vol. 11, Issue 5, pp. 46 - 54, Sep. -  Oct. 2014. (ISSN:2278 – 1684 (Online, ISSN: 2320 – 334X (Print), Google Scholar Indexed)
  69. Shaik Shafee, B. Balu Naik, K. Sammaiah,  and Mohd Mohinoddin, “Study on Nugget Development RSW Process with Flat Ti Cylindrical Electrode,” IOSR Journal of Mechanical and Civil Engineering, Vol 11, Issue 5, pp. 09 - 17, Sep - Oct. 2014. (ISSN:2278 – 1684 (Online, ISSN: 2320 – 334X (Print), Google Scholar Indexed)
  70. K. Sammaiah, N. N. Ramesh, D. Govardhan, and VVSH Prasad, “Determination of Weld Loads by Using Design of Experiments for Low Carbon Steel Sheet for Automobile Application,” International Journal of Emerging & Advanced Engineering, Vol. 4,  Issue 2, pp. 606 – 611, Feb. 2014.  (ISSN: 2250 – 2459, Impact Factor: 2.34)
  71. D. Prudhvi Raju, “Multi - Draft Teacher Feedback and Feedback Conference to Improve Student Writing,” International Journal of Language, Literature and Culture Studies, Vol. 1, Issue 2, pp. 23 - 26, 2014. (ISSN: 2381 - 3725 (Online), 2381 - 3733 (Print))
  72. D. Prudhvi Raju, “Writing as an Essential Modality in Second Language Learning,” Journal of Indian Musings, Vol. 2, Issue 2, pp. 133 - 136, 2014.
  73. Rizwana and P. Sarah, “Study of Effect of Doping on Grain and Grain Boundary Parameters of Sr1-2xNaxNdxBi4Ti4O15 (x = 0 - 0.5) Ceramics using Impedance Spectroscopy,” Journal of Ferroelectrics, Vol. 467, pp. 146 - 157, 2014. (ISSN: 1563 - 5112 (Online), 0015 - 0193 (Print), DOI: http://dx.doi.org/ 10.1080/ 00150193.2014.932611, ISI Indexed)
  74. Rizwana and P. Sarah, “Dielectric, Ferroelectric and Piezoelectric Properties of Sr0.8Na0.1Nd0.1Bi4Ti4O15 Prepared By Sol Gel and Solid State Technique,” Journal of Ferroelectrics, Vol. 467, pp. 181 - 193, 2014. ISSN: 1563 - 5112 (Online), 0015 - 0193 (Print), http://dx.doi.org/10.1080/00150193.2014.932616, ISI Indexe)
  75. V. Anitha Rani and  Y. Bharthi Kumari, “An Efficient and Green Synthesis of B - 2 - N - ( carbothioamido) - 6 - oxo - 1, 2, 5, 6 - tetrahydro - 1 - N - H - 1, 2, 4 - triazine Derivities and Their Anti - Bacterial Activity Evaluation,” Asian Journal of Chemistry, Vol. 26, pp. 56 - 60, 2014.  ISSN: 0975 - 427X (Online), 0970 - 7077 (Print), DOI:10.14233/ajchem.2014.16333, Scopus Indexed, Impact Factor: 0.19)
  76. VVSH Prasad, N. Ananth, D. Mahesh, MDA Miyan, R. Banjare, and VV Nath, “Design Optimization Using Genetic Algorithm and Validation in ANSYS,” Paripex – Indian Journal of Research, Vol.3, No. 4, pp. 262 -  264, 2014. (ISSN: 2250 – 1991, DOI: 10.15373/22501991/Apr. 2014/44, Google Scholar Indexed, Impact Factor: 5.215)
  77. Chillara Somashekar, “Parametric Fitting of Non - Function - Like curves by Minmaxion and Minaddition,” International Journal of Scientific and Innovative Mathematical Research, Vol. 2, Issue 2, pp. 221 - 232, Mar. 2014. (ISSN 2347 - 3142 (Online), 2347 - 307X (Print))
  78. Chillara Somashekar, “Connective Stem Determination by Minmaxion,” International Journal of Modern Sciences and Engineering Technology, Vol. 1, Issue 3, pp. 29 - 35, 2014. (ISSN: 2349 – 3755, DRIJ Indexed, Impact Factor: 3.094)
  79. Krishna Mohan and N. Ananth, “Aspect Ratio Optimization & Modal Analysis of Plate by Integrating PSO in MATLAB with ANSYS – An Automation Approach,” Indian Journal of Applied Research, Vol. 4, No. 3, pp. 170 – 173, 2014. (ISSN: 2249 - 555X, Google Scholar Indexed)
  80. J. Nageswara Rao, N. Jaya Madhuri, J. Glory, P. S. Naidu, and  K. Ravindra Prasad, “Excess  Thermodynamic and Other Allied Parameters in the Binary Mixtures of Cresols and Azo Compounds with Benzyl Benzoate as Common Component,” International Journal of Pure Applied Chemistry, Vol. 9, Issue 3, pp. 81 - 91, 2014.  (ISSN: 0973 – 3876)
  81. N. Rajeswara Rao, T. Venkatappa Rao, S.V.S. Ramana Reddy, and B. Sanjeeva Rao, “Influence of Gamma Irradiation on Chemical Structure and Thermal Properties of Polyethylene Maleic Anhydride,” Journal of Polymer Materials, Vol. 31, Issue 4, pp. 519 - 531, 2014. (ISSN: 0973 - 8622 (Online), 0970 - 0838 (Print))

Conference Publications

  1. L V Narasimha Prasad, C. Kishor Kumar Reddy, and M M Naidu, “An Entropy Based Elegant   Decision Tree Classifier to Predict Precipitation,” IEEE European Modeling Symposium on Mathematical Modeling and Computer Simulation, Pisa, pp. 11-19, 2014. (ISBN: 978-1-4799-7412-2, DOI: 10.1109/EMS.2014.34)
  2. C. Kishor Kumar Reddy, P. R. Anisha, and  L V Narasimha Prasad, “Detection of  Thunderstorms Using Data Mining And Image Processing,” International Conference on the Applications of  Digital Information and Web Technologies, Chennai, India, pp. 226 - 231, Feb. 17 - 19, 2014. (ISBN: 978-1-4799-2259-8, DOI: 10.1109/ICADIWT.2014.6814672)
  3. Viswanath Kambhampaty, Rohith Gali, and L V Narasimha Prasad, “A Short Term Tornado Prediction Model Using Satellite Imagery,” IEEE International Conference on Systems Informatics, Modelling and Simulation, Sheffield, UK, pp. 132 - 138, Apr. 29 – May 1, 2014. (ISBN: 978-0-7695-5198-2, DOI: 10.1109/SIMS.2014.29)
  4. Murali Prasad Raja, L V Narasimha Prasad,  and Vasavi Krishna Yacham, “Real Time Detection of  Hurricanes From Satellite Cloud Imagery Using Haar Wavelet,” IAENG International Conference on Signal Processing and Imaging Engineering, San Francisco, USA, pp. 483 - 489, Oct. 22 - 24, 2014. (ISBN: 978-988-19252-0-6, ISSN: 2078-0958 (Print); ISSN: 2078-0966 (Online))
  5. Gurram Sunitha, and A. Rama Mohan Reddy, “Mining Relative Sequential Patterns,” International Conference on Statistics and Information Technology for a Growing Nation, 2014.
  6. Y. Mohana Roopa and A. Rama Mohan Reddy, “A Software Architecture Model forSelf-Adaptive Systems Using PSO,” International Conference on Information Technology, Computer Science & Management, Chennai, Jan. 19, 2014. (ISSN: 2320 – 2106)
  7. B. Jaya Vijaya and Y. Mohana Roopa, “Two Mopso Algorithms for Feature Selection,” International Conference on Information Technology, Computer Science & Management, Chennai, Jan. 19, 2014. (ISBN: 978 - 93 - 84209 - 48 – 3)
  8. Madhuri Avula, L V Narasimha Prasad, and Murali Prasad Raja, “Bone Cancer Detection from MRI Scan Imagery Using Mean Pixel Intensity,” IEEE Asia International Conference on Mathematical Modelling and Computer Simulation, 2014.  (DOI: 10.1109/AMS.2014.36)
  9. D. Harihara Santosh, P. G. Krishna Mohan, “Multiple Objects Tracking Using Extended Kalman Filter, GMM and Mean Shift Algorithm – A comparative Study,” IEEE International Conference on Advanced Communication Control and Computing Technologies, Chennai, India, May 8 - 10, 2014. (ISBN: 9781479939138, DOI: 10.1109/ICACCCT.2014.7019350)
  10. D. Harihara Santosh and P. G. Krishna Mohan, “Tracking Manifold Objects in Motion Using Gaussian Mixture Model And Blob Analysis,” IEEE International Conference on Convergence of Technology,   Pune, India, Apr. 6 - 8, 2014.
  11. R. Gangadhar Reddy and J.V.R. Ravindra, “A Novel Power - Aware And High Performance Full Adder Cell For Ultra - Low Power Designs," IEEE International Conference on Circuits, Power and Computing Technologies, Kumaracoil, Tamilnadu, pp. 85 - 91, Mar. 20 - 21, 2014. (ISBN: 978-1-4799-2397-7, DOI: 10.1109/ICCPCT.2014.7055037)
  12. L. J. V. Kumar, J. K.  Kishore, P. Kesava Rao, and R. Sateesh Kumar, “Marine Oil Spill Detection Based On Risat - 1 Hybrid Polarity Synthetic Aperture Radar Images with Decomposition Methods and Unsupervised Classification,” Global Space Applications Conference, UNESCO Head Quarters, PARIS, June 2, 2014.
  13. P. Sridhar, “Modelling, Simulation and Hardware Implementation of Fault Current Limiter in Single Phase and Three Phase Lines for Compensating Voltage Sag,” IEEE  International conference on Smart Electrical Grid, Andhra Pradesh, India, Sept. 19 - 20,  2014. (DOI: 10.1109/ISEG.2014.7005619)
  14. P. Sridhar, “Integration of Unique Switch Type Fault Current Limiter to mitigate the Power Quality problems in Distribution System, “IEEE International Conference on Smart Structures and Systems, Oct. 9, 2014. (DOI: 10.1109/ICSSS.2014.7006199)
  15. D. Govardhan, “Friction Surfacing Applications for Critical Components,” National Conference on Emerging Technologies in Material Sciences and Engineering, Defence Metallurgical Research Laboratories, Hyderabad, Mar. 18, 2014.
  16. E. Madhusudan Raju, L. Siva Rama Krishna, Y. Sharath Chandra Mouli, V. Nageswara Rao, “Analysis of Tip Position of A Single Link Flexible Robotic Arm,” National Conference on Emerging Trends in Mechanical Engineering,  Dec. 29&30, 2014. DOI: 10.13140/2.1.2733.0886
  17. Y. Sharath Chandra Mouli, Y. Surya Prakash, “Mathematical Modeling and Inherent Stability Analysis of a Flexible Joint RR Type Robotic Manipulator,” National Conference on Emerging Trends in Mechanical engineering, Dec. 29&30, 2014.
  18. T. Vanaja and  VVSH Prasad, “Experimental Estimation of Cutting Forces Using Striang Gauge Principle,” International Conference on Advances in Mechanical Sciences, Hyderabad, India,  Jan 9 - 11, 2014.
  19. N. Santhi Sree and VVSH Prasad, “Performance of Four stroke Multi Cylinder Petrol Engine with Gasoline and LPG,” International Conference on Advances in Mechanical Sciences, Hyderabad, India,  Jan 9 - 11, 2014.
  20. KGK Murti, “Problems and Solutions for Joining  of Dissimilar Materials for Industrial Applications,” National Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India,  pp. 21 - 27, Mar. 18 - 19, 2014.
  21. Kancha Sammaiah, KGK  Murti, D. Govardhan and VVSH Prasad, “Study and Direct Spot Welding Process for Low Carbon Steel Sheet for Industrial Applications by Using Design of Experiments,” National Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India, Mar. 18 - 19, 2014.
  22. N. Santhi Sree and G. Prasanth Kumar Reddy, “Enhancement of Heat Tranfer by Nano Fluids in Solar Collectors,” Natioal Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India,  pp. 76 - 81, Mar. 18 - 19, 2014.
  23. D. Govardhan, K. Sammaih, KGK Murti,VVSH Prasad, and G. Madhusudhan Reddy, “Friction Surfacing Applications for Critical Components,” Natioanl Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India,  pp. 37 - 41, Mar.  18 - 19, 2014.
  24. T. Vanaja, N. Ananth VVS Haranadh Prasad, and N. N. Ramesh “Investigation of Tribological and Mechanical Properties of Metal Bearings,” National Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India,  pp. 43 - 47, Mar. 18 - 19, 2014.
  25. Shaik Shafee, B Balu Naik, and K Sammaiah, “Resistance Spot Weld Quality Characteristics Improvement By Taguchi Method,” National Conference on Energing Trends in Science Technology and Management, Hyderabad, India, Sept. 2014.
  26. Shaik Shafee, B Balu Naik, K Sammaiah,  and Mohd Mohinoddin, “Effect of Electrode Force on Spot Weld Quality,” National Conference on Energing Trends in Science Technology and Management,  Hyderabad, India, pp. 157 - 162, 2014.
  27. P. B. Esther Rani, “Binodini Dasi: My Story and My Life as an Actress,” National Conference on Women’s Autobiographies in India: Theory and Practice, Hyderabad, India, Mar. 29 & 30, 2014.
  28. P. B. Esther Rani, “ELT: Innovative Methods,” National Conference on English Language and Soft Skills: Problems and Perspectives, Andhra Pradesh, India, Apr. 26, 2014.
  29. P. B. Esther Rani, “Social Networking Sites and Language Learning,” National Conference on Importance of English Language Laboratory for Improving Communication Skills at UG level, Sept. 20, 2014.
  30. K. Jagan Mohan Rao, “Lienard Equation and its Applications,” Annual Summer Research Symposium, Tata Institute of Fundamental Research, Hyderabad, India, June 26, 2014.
  31. V. Sreeharibabu and A. Jayanth Kumar, “Characteristics Properties Of Chemically Doped Beryllium Chloride Thin Films Using Optical Fibers,” International Conference on Nano Science and Engineering Applications, Hyderabad, India, June 26 - 28, 2014.
  32. Chillara Somashekar, “Connective Stem Determination by Minimaxion,” National Conference on Emerging Trends in Mathematical Sciences and Engineering Applications, Kakinada, Andhra Pradesh, India, pp. 23 - 24, May 2014.
  33. Shirisha Deshpande, “Teaching Employability Skills through Multimedia,” National Conference on Importance of English Language Laboratory for Improvement Communication Skills, Hyderabad, India, Sept. 20, 2014.
  34. N. Rajeswara Rao, T. Venkatappa Rao, S.V.S. Ramana Reddy, and B. Sanjeeva Rao, “Effect of Electron Beam on Thermal, Morphological and Aproperties of Kraft Lignin,” International Conference on Smart Materials and Surfaces, Bangkok, Thailand, Aug. 2014. (DOI: 10.5185/amlett.2015.SMS2)

1 January, 2013 to 31 December, 2013

Journal Publications

  1. L V Narasimha Prasad,  K. Prudhvi Kumar Reddy, and M M Naidu, “An Efficient Decision Tree  Classifier To Predict Precipitation Using Gain Ratio,”International Journal of  Soft Computing and  Software Engineering, vol. 3, No. 3, pp. 674 - 682, 2013.(ISSN: 2251-7545 (Online), DOI: 10.7321/jscse.v3.n3.103, Scopus Indexed)
  2. J. Sowmya Lakshmi and R. V. Krishnaiah, “Expert Discovery and Interactions in Mixed Service Oriented Systems,” International Journal of Advanced Research in Computer and Communication Engineering, Vol. 2, Issue 8, pp. 3162 - 3165, Aug. 2013. (ISSN: 2278 - 1021 (Online), 2319 - 5940 (Print), Google Scholar Indexed, Impact Factor: 5.332)
  3. Sibani Priyadarshini and R. V. Krishnaiah, “Seamless Ubiquitous Data Migration through Route Optimization in Mobile IP,” International Journal of Engineering Sciences and Research Technology, Vol. 2, Issue 10, pp. 2739 - 2742, Oct. 2013.  (ISSN: 2277 – 9655, Google Scholar Indexed, Impact Factor: 1.852)
  4. Sri Sathyavani and R. V. Krishnaiah, “A Real Time Implementation System for Physical Disabled People through Zigbee Protocol,”International Journal of Engineering Sciences and Research Technology, Oct. 2013. (ISSN: 2277 – 9655, Google Scholar Indexed, Impact Factor: 1.852)
  5. K. Chaitanya, P. Purushotham, and R.V. Krishnaiah, “Robust and Scalable Structure for Server Interconnections in Data Centers,” International Journal of Advanced Research in Computer and Communication Engineering, Vol. 2, Issue 8, pp. 3152 - 3156, Aug. 2013. (ISSN: 2278 - 1021 (Online), 2319 - 5940 (Print), Google Scholar Indexed, Impact Factor: 5.332)
  6. Y. Mohana Roopa and K.Sangeetha Supriya “Mobility Scenario - Based Performance Evaluation of Preemptive DSR Protocol for MANET,” Publications of Problems & Application in Engineering Research, Vol. 04, Special Issue 01, pp. 162 - 169, 2013. (ISSN: 2230 - 8555(Online), 2230 - 8547 (Print), Scincee centra Indexed, Impact Factor: 1.3)
  7. Y. Mohana Roopa and  A. Praveena, “Resource Allocation Using Entropy Based FIFO Method in Mobile Cloud Computing,” International Journal of  Engineering sciences Research ,Vol. 4, Issue 1,  pp. 1289 - 1292, 2013. (ISSN: 2230 - 8512 (Online), 2230 - 8504 (Print), Google Scholar Indexed, Impact Factor: 3.47)
  8. Y. Mohana Roopa and B. Rajani, “Software Component Capturing Using Clustering Algorithm,” International Journal of Systems Algorithms and Applications, June 2013. (ISSN: 2277-2677)
  9. Y. Mohana Roopa and B. Rajani, “Source Code to Module Dependency Graph Using Class Dependency Analyzer, “International Journal of  Advanced Research in Computer Science and Software Engineering, Vol. 03, Issue 07, pp. 197 - 201, July 2013. (ISSN: 2277 - 128X, Google Scholar Indexed, Impact Factor: 2.5)
  10. Y. Mohana Roopa, J. Bala Murali Krishna, and P. Govinda Raju, “Hierarchical Attribute - Based Access Control and Scalable User Revocation Data Sharing in Cloud Server,” International Journal of Computer Science Information and Engineering Technology, Vol. 1, Issue 3, June 2013. (ISSN: 2277-4408, Google Scholar Indexed)
  11. Y. Mohana Roopa, J. Bala Murali Krishna, and P. Govinda Raju, “Particle Swarm Optimization Approach for Component Based Software Architecture,” International Journal of  Advanced Research in Computer Science and Software Engineering, Vol. 03, Issue12, pp. 557 - 561, Dec. 2013. (ISSN: 2277 - 128X, Google Scholar Indexed, Impact Factor: 2.5)
  12. Swarajyalaxmi      and K. Sunieeta, “Data Mining Tasks and Techniques for Information and Pattern Discovery on World Wide Web,” International Journal of Computer Science and Electronics Engineering, 2013. (ISSN: 2320 - 4028 (Online), 2320 - 401X (Print), Google Scholar Indexed)
  13. C. Madhuri and A. Krishna Chaitanya, “A New Distributed Accountability and Auditability for Data Storage in Cloud Computing,” International Journal of Mathematics and Computer Research, Vol. 1, Issue 1, pp. 25, 2013. (ISSN: 2320 – 7167, Copernicus, Google Scholar Indexed)
  14. G. Vijay Kumar and A. Krishna Chaitanya, “Organizing User Search Histories into Relevant Query Groups by Using Em–Algorithm,” International Journal of Research, Vol. 2, Issue 2, pp. 116-118, 2013. (ISSN: 2250 – 1991)
  15. B. Mounika and A. Krishna Chaitanya, “Context - Sensitive Modeling for Intrusions Detection in Multitier Web Applications,” International Journal of Scientific & Engineering Research, Vol. 4, Issue 4, pp. 685 - 688, Apr. 2013. (ISSN: 2229 – 5518, Copernicus Indexed, Impact Factor: 3.8)
  16. Krishna Chaitanya and B. Mounika, “Pattern Mapping Approach for Detecting Xss Attacks in Multi - Tier Web Applications Using Double Guard,” Journal of  Computer Engineering, Vol. 12, Issue 3, pp. 1 - 5, July -  Aug. 2013. (ISSN: 2278 - 0661(Online), ISSN: 2278 – 8727 (Print), Google Scholar Indexed)  
  17. K. Neeraja, B. Savitha Reddy, and D. Rajini, “Accountability in Distributed Environment for Data Sharing in a Cloud,” International Journal of Computer Applications Technology and Research, Vol. 2, Issue 4, pp. 431-435, 2013. (ISSN: 2319–8656, Google Scholar Indexed, Impact Factor: 1.1)
  18. E. Uma Shankari, T.Shesagiri, and J.V. Krishna, “Publishing Data Maintenance of Privacy by Slicing Based Approach,” International Journal of Reviews on Recent Electronics and Computer Science, Vol. 1, Issue 5, pp. 789-795, Sep. 2013. (ISSN: 2321 – 5461, Impact Factor: 2.53)
  19. B. Jyothi, Y. Madhavee Latha, P.G. Krishna Mohan, and V.S.K. Reddy, “Medical Image Retrieval Using Moments,” International Journal of Application or Innovation in Engineering & Management, Vol. 2, Issue 1, pp.195 - 200, Jan. 2013. (ISSN: 2319 – 4847, Scopus Indexed, Impact Factor: 5.427)
  20. D. Khalandar Basha, G. Srinivas Reddy, and T. Venkat Narayana Rao,  “Enhanced Contour Based Segmentation for Fingerprint Extraction,” International Journal of Advanced Research in Computer Science and Software Engineering, Vol. 3, Issue 2, pp. 277  - 281, Feb. 2013.  (ISSN: 2277-128X, Google Scholar Indexed, Impact Factor: 2.5)
  21. C. Srihari and M.Gopi “A High Speed Two’s Complement Multiplier Realization in FPGA,” International Journal of Engineering Research & Technology, Vol. 2, Issue 11, Nov. 2013. (ISSN: 2278-0181, Google Scholar Indexed, Impact Factor: 1.76)
  22. N. Nagaraju, T. Satyasavitri, and Ch. A. Swamy, “Image Registration Using Scale Invariant Feature Transform,” International Journal of Scientific Engineering and Technology, Vol. 2, Issue 7, pp.675 - 680, Jul. 2013. (ISSN: 2277 – 1581, Impact Factor: 0.489)
  23. TVB Phani Kumar, N.  Nagraju, and Ch Santhosh Kumar, “Microwave Stepped Impedance LPF Design at 1.2GHz,” International Journal of Innovative Research in Science Engineering and Technology, Vol. 2, Issue 11, pp. 6371 - 6377, Nov. 2013. ISSN: 2319 – 8753, Google Scholar Indexed, Impact Factor:6.209)
  24. P. M. Sharma and S. V. Jaya Ram Kumar, “Single Phase Grid Connectable SPWM Inverter,” International Journal of Research in Computer Engineering and Electronics, Vol. 2 Issue 3, June 2013. (ISSN: 2319 - 376X, Google Scholar Indexed, Impact Factor: 3.3)
  25. P. M. Sharma and S. V. Jaya Ram Kumar, “Electric Arc Furnace Flicker Mitigation in Steel Plant Using STATCOM,” International Journal of Engineering Science and Innovative Technology (IJESIT), Vol. 2, Issue 1, Jan. 2013. (ISSN: 2319 – 5967, Google Scholar Indexed)
  26. G. Swapna, V. Hima Bindhu, M. Chakravarthy, and P. M. Sarma, “Hardware Implementation of Single Phase Inverter,” International Journal of Engineering Trends and Technology (IJETT) – Vol. 4 Issue 8, Aug. 2013. (ISSN: 2231 – 5381, Google Scholar, Thomson Reuters End Note Indexed, Impact Factor: 1.656)
  27. K. Linga Swamy, “An Approach towards Modelling of Hybrid Power System,” International Journal of Review on Recent on Electronics and Computer Sciences, Vol.1, Issue 8, Dec. 2013. (ISSN 2321 – 5461, Impact Factor: 2.53)
  28. A. Sathish Kumar, "DC - AC Single Phase Resonant Inverter Using Soft Switching Boost Converter with Resistive Load,” International Journal of Engineering Research and Technology, Vol. 2, Issue 10, Oct.  2013. (ISSN: 2278 – 0181, Google Scholar Indexed, Impact Factor: 1.76)
  29. Jayanth Kumar, T. Radha Krishna, and B. S. Bellubbi, “Study of Intensity Modulated Fiber Optic Sensor – Effect of Length of Core Exposed in Guiding Liquid,” International Journal of Scientific Engineering and Technology, Vol. 2, Issue 3, pp. 112 - 115, 2013. (ISSN: 2277 – 1581, Impact Factor: 0.489)
  30. N. JayaMadhuri, J. Glory, P. Subramanyam Naidu, and K. Ravindra Prasad, “Ultrasonic Studies in the Solutions of Three Hydrate Drugs in Methanol,” Journal of Atoms and Molecules, Vol. 3, Issue 2, pp. 492 - 498, 2013. (ISSN: 2277-1247, ICI,, COSMOS, Google Scholar Indexed, Impact Factor: 0.347)
  31. C. Venkatasubbaiah, V. Sreeharibabu, A. Jayanth Kumar, and S. Chandralingam, “Study of Characterization of Intensity Modulated Fiber Optic Sensor,” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 2, Issue 5, pp. 1454 - 1460, 2013. (ISSN: 2319 - 8753 (Online), 2347 - 6710 (Print), Google Scholar Indexed, Impact Factor: 6.029)
  32. S. Srilalitha, Jayaveera and A. Jayanth Kumar, “Characterization of Polyblend - Nanofilms of Cellulose Acetate and Polystyrene,” Asian Journal of Chemistry, Vol. 25, pp. S329 - S332, 2013. (ISSN: 0975 - 427X (Online),  0970 - 7077 (Print), Scopus Indexed, Impact Factor: 0.19)
  33. S. Srilalitha, Jayaveera and A. Jayanth Kumar, “Synthesis and Characterization of Polyblend – Nanofilms of Poly and Poly Styrene,” International Journal of Nanoscience and Nanotechnology, Tamilnadu, India, July 10 - 12, 2013. (ISSN: 1735 – 7004)
  34. Kameshwari, “Sarojini Naidu - Poetising Indian Heritage,” Muse India, Online Journal, Issue 48, Mar. - Apr., 2013. (ISSN: 0975 - 1815 )
  35. N. N. Ramesh,  “Morphology of Machines Surfaces from Electro Discharge Sawing and Sinking Electro Discharge Machining,” World Academy of Science, Engineering & Technology, Vol. 7, Issue 1,  pp. 825 - 828, 2013. (DOI: scholar.waset.org/ 1999.8/13203)
  36. N. N. Ramesh, “Experimental Design and Analysis of Relative Effects of Variable Factors on Electo Discharge Sawing Process Using Taguchi Approach,” Trans Tech Publications, Switzerland, Applied Mechanics  and Materials, Vol. 3,  pp. 299 - 303, 2013.        (DOI: 10.4028/www.scientific.net/AMM.315.299)
  37. Krishna Mohan and N. Ananth, “Reliability Based Design of Laminated Composites – A New Approach,” Global Journal for Research Analysis, Vol. 2, No. 11, pp. 44 – 46, 2013. (ISSN: 2277–8160, Google Scholar Indexed, Impact Factor: 3.62)
  38. V. Satish Kumar, N. N. Ramesh, Ch. Srinivas, and R. Lalitha Narayana, “Electro Discharge Sawing vis a vise Electrodischarge Machining,” International Journal of Engineering Research and Technology, Vol 2, Issue 10, pp. 89 - 94, 2013. (ISSN: 2278 – 0181, Google Scholar Indexed, Impact Factor: 1.76)
  39. K. Hairnarayana, B. Balu Naik , and N. N. Ramesh, “Study of Investigation on Process Parameters of Electro Discharge Sawing Using Taguchi Approach,” International Journal of Engineering Research and Technology, Vol 2, Issue 7, 2013. (ISSN: 2278 – 0181, Google Scholar Indexed, Impact Factor: 1.76)
  40. N. N. Ramesh, “Morphology of Machines Surfaces from Electro Discharge Sawing and Sinking Electro Discharge Machining, World Academy of Science, Engineering & Technology, Vol. 7,  Issue 1, pp. 825 - 828, 2013. (DOI: scholar.waset.org/ 1999.8/ 13203)
  41. K. Srinivasa Vadayar, G. Poshal, and V.V. Bhanu Prasad, “Pressureless Sintering of Titanium Matrix Composites,” Technology Spectrum Journal, Vol. 5, Issue 1,   pp. 78 - 82, 2013.
  42. J. S. R. Prasad, Yogendra Singh, Dominik H. Lang, and Rajesh Deoliya, “An Analytical Study on the Seismic Vulnerability of Masonry Buildings in India,” Journal of Earthquake Engineering, Vol. 17, pp. 399–422, 2013. (ISSN: 1559 - 808X (Online), 1363 - 2469 (Print), DOI: 10.1080/13632469.2012.746210)
  43. Sangam Samal and P. K. Dash, “Reduction of Wingtip Vortices by Using Active  Means,”  International Journal of Scientific & Engineering Research,  Vol. 4, Issue 4, pp. 1280 - 1287, Apr. 2013.(ISSN: 2229 – 5518, Copernicus Indexed, Impact Factor: 3.8)
  44. Sangam Samal and P. K. Dash, “Reduction of Wingtip Vortex from Suction at Wingtip,” Journal of Mechanical Engineering Research, Vol. 3, No. 1, pp. 152 - 162, 2013.  (ISSN: 2141 – 2383,, EZB, World Cat Indexed)

 

Conference Publications

  1. L V Narasimha Prasad, K. Prudhvi Kumar Reddy, and M. M. Naidu, “An Approach To Prediction of  Precipitation Using Gini Index in SLIQ Decision Tree,” International Conference on Intelligent Systems, Modelling & Simulation, Bangkok, pp. 56 - 60, Jan. 29 - 31, 2013.(ISSN: 2166-0662 (Print), ISBN: 978-1-4673-5653-4 (Print), DOI: 10.1109/ISMS.2013.27)
  2. G. Raj Kumar, L V Narasimha Prasad, and B. Padmaja, “Monitoring and Extracting Abnormalities in Land Surface Temperature Images for Automatically Identification of  Forest Fires,” IEEE European Modelling Symposium, Manchester, UK, pp. 215 - 219, Nov. 20 - 22, 2013.(ISBN: 978-1-4799-2577-3, DOI:10.1109/EMS.2013.37)
  3. P. Shankar Murthy, L V Narasimha Prasad, and C. Kishor Kumar Reddy, “Analysis of  Magnitude for Earthquake Detection Using  Primary Waves and Secondary Waves," IEEE International Conference on Human Computer Interactions, Chennai, India,  pp. 1 - 6, Aug. 23 - 24, 2013. (ISBN: 978-1-4673-5703-6 (Online), DOI:10.1109/ICHCI-IEEE.2013.6887820)
  4. L V Narasimha Prasad, C. Kishor Kumar Reddy, and P. R.  Anisha, “Remote Sensing of  Snow Wrap Using Clustering and Wavelet Transform,” International Conference on Human Computer Interactions, Chennai, India,  pp. 1 - 8, Aug. 23 - 24, 2013.(DOI: 10.1109/ICHCI - IEEE.2013.6887822)
  5. L V Narasimha Prasad, K. Prudhvi Kumar Reddy, and M M  Naidu, "A Novel Decision Tree Approach for The Prediction of  Precipitation Using Entropy in SLIQ," IEEE International Conference on Modelling and Simulation, Cambridge, UK, pp. 209 - 217, Apr. 10 - 12, 2013.(ISBN: 978-1-4673-6421-8, DOI:10.1109/UKSim.2013.74)
  6. JVR Ravindra, PandurangaiahYagateela, and L V Narasimha Prasad, “A Novel Analytical Model for Analysis of Delay and Crosstalk in Nonlinear,”IEEE International Conference on Modelling and Simulation, Cambridge, UK, pp. 798 - 802, Apr. 10 - 12, 2013.(ISBN: 978-1-4673-6421-8,  DOI: 10.1109/UKSim.2013.143)
  7. L V Narasimha Prasad, E. Krishna Rao Patro, and M. M. Naidu, “A Gini Index Based Elegant Decision Tree Classifier To Predict Precipitation,” IEEE Asia International Conference on Mathematical/Analytical Modelling and Computer Simulation,  Hong Kong, pp. 46 - 54, Jul. 23 - 25, 2013.(ISSN: 2376-1164, DOI: 10.1109/AMS.2013.12)
  8. L V Narasimha Prasad and M M Naidu, “Gain Ratio As Attribute Selection Measure in Elegant Decision Tree To Predict Precipitation,” IEEE EUROSIM Congress on Modeling and Simulation, UK, pp. 141 - 150, 2013.(ISBN: 978-0-7695-5073-2, DOI: 10.1109/EUROSIM.2013.35)
  9. Anisha Ravinder, K. Prudhvi Kumar Reddy, and L V Narasimha Prasad, “Detection of  Wavelengths for Hail Identification Using Satellite Imagery of  Clouds," IEEE International Conference on Computational Intelligence, Communication Systems and Networks, Spain, pp. 205 - 211, 2013.(ISBN:978-1-4799-0587-4, DOI:0.1109/CICSYN.2013.14)
  10. G. Raj Kumar, L V Narasimha Prasad, and B. Padmaja, “Monitoring and Extracting Abnormalities in Land Surface Temperature Images for Automatically Identification of Forest Fires,” IEEE European Modeling Symposium, Manchester, UK, pp. 215 - 219, Nov. 20 - 22, 2013.(ISBN:  978-1-4799-2577-3, DOI: 10.1109/EMS.2013.37)
  11. Y. Mohana Roopa and A. Rama Mohan Reddy, “Software Component Capturing Using Clustering Algorithms,” National Conference  on  Advances in Computational Intelligence  & Computer Engineering, Tirupathi, India, 23- 24 Oct. 2013.
  12. Y. Mohana Roopa and A. P raveena,”Resource Allocation Using Entropy Based FIFO Method in Mobile Cloud Computing,” National Conference  on  Advances in Computational Intelligence  & Computer Engineering, Tirupathi, India, 23- 24 Oct.  2013.
  13. O. Narendra Reddy, M. M. Venkata Chalapathi, and P. Krishna Kishore, “Multitier Security: Detecting Intrusions in Multitier Web Applications,” SARC - ITR International conference,Chennai, India, July 2013. (ISBN: 978-93-82702-23-8)
  14. R. Gangadhar Reddy, J.V.R. Ravindra, K. Harikrishna, “Design of Ultra Lowpower Full Adder Using Modified Branch Based Logic Style,”IEEE  European Modelling Symposium on Mathematical Modelling and Computer Simulation, Manchester, UK, pp. 650 - 655, Nov. 20 - 22, 2013.(ISBN: 978-1-4799-2578-0 DOI: 10.1109/ EMS.2013.116)
  15. P. Kesava Rao, “Roughness Index as A Novel Quality Indicator of Digital Surface Models,” IETE Mid Term Symposium on ICT in Space, Defence and Industrial Applications, 20 – 22 Apr.  2013, Hyderabad.
  16. L. J. V. Kumar, J. K.  Kishore, and P. Kesava Rao, “Unsupervised Classification Based on Decomposition of RISAT-1 Images for Oil Spill Detection,” IEEE International Conference on Advances in Computing and Communications, Kerala, India, pp. 739 - 746, 22-35 Aug., 2013. (ISBN: 978-1-4673-6217-7 (Online), 978-1-4799-2432-5 (Print), DOI: 10.1109/ICACCI.2013.6637266)
  17. S. Charvani and Gopal Reddy, “Properties of  Nanopowder & Epoxy Resin Composites,” International Conference on Advanced Materials, Hyderabad, India, 2013.
  18. S. Charvani and Gopal Reddy, “Preparation of Nano Composites Laminates with Aramid Fiber as Reinforcement,” National Conference on Emerging Trends for Sustainable Development, Andhra Pradesh, India, Mar. 23 - 24, 2013.
  19. V. Anitha Rani and Y. Bharthi Kumari, “Green Synthesis of (Z) - N - 5 - (Benzylidene/Substituted Benzylidene) - 2 - Benzamido - 3 - (Methyl/Phenyl) - 6 - oxo - 1, 2, 5, 6 - Tetrahydro - 1, 2, 4,” National Conference on Frontiers of Chemical Research, Hyderabad, India, Dec. 19 - 22, 2013.
  20. B. Kondal, “New Pedagogy in ELT Classroom,” National Conference on Council for Teacher Education on Quality Education, Hyderabad, India, Feb. 1 - 3, 2013.
  21. J. Suresh Goud, “Peristaltic Transportation,” National Conference on Mathematical Applications in Engineering, Hyderabad, India, Sept. 6 & 7, 2013.
  22. Chillara Somashekar, “Applications of Morphological Cell Analysis by Image Processing,” National Conference on Recent Trends in Applications of Mathematics, Hyderabad, India, Dec. 13 - 15, 2013.
  23. Chillara Somashekar, “Parametric Fitting of Non - Function - Like Curves by Minimaxion and Minaddition,” National Conference on Recent Trends in Mathematical Computing, Chennai, India, Aug. 23 - 24, 2013.
  24. N. Rajeswara Rao, T. Venkatappa Rao, S.V.S. Ramana Reddy, and B. Sanjeeva Rao, “A Study on Gamma Irradiation Induced Changes in Biodegradable Polyglycolic Acid,” International conference on Advanced Polymeric Materials, Kottayam, Kerala, India, 2013.(DOI:10.1080/10420150.2015.1036423)
  25. C. Labesh Kumar, S. Ravinder Reddy, K. Sai Ram, and P. Janaki Ramulu, “A Statistical Study on Supply Chain in Iron Foundry," International Symposium on Advances in Automotive Technology,Bhubaneswar, Odisha, India, pp. 33 - 35, 20-21 Dec. 2013.
  26. S. Ravinder Reddy, N. Jeevan Kumar, C. Labesh Kumar, and P. Janaki Ramulu, “High Velocity Impact on Composite Panels Made of Fiber Reinforced Plastics Using FEM Analysis,” International symposium on Advances in Automotive Technology Bhubaneswar, Odisha, India, pp. 36 - 41, 20-21 Dec.  2013.
  27. N. N. Ramesh,, “Investigating the Effects of Machining Parameters on Microdrilling  of Titanium Grade 19 Alloy,” International Mechanical Engineering Congress & Exposition,  San Diego, CA, USA, Nov. 15 - 21, 2013.
  28. N. N. Ramesh,“Morphology of Machines Surfaces From Electro Discharge Swaing and Sinking Electro Discharge Machining,” International Conference on Aerospace Mechanical Automotive and Materials Engineering, WASET Conference, Dubai, Vol. 7, pp. 1157 - 1160, Jan. 30 - 31, 2013. (DOI:scholar.waset.org/1999.8/13203)

1 January, 2012 to 31 December, 2012

Journal Publications

  1. R. V. Krishnaiah and K. Krishna Jyothi, “An Operating System for Clouds: Mechanisms and Implementation,” International Journal of  Computer Electrical and Advanced Communication Engineering, Vol. 1, Issue 3, pp. 1 - 10, July - Dec. 2012.(ISSN: 2250-3129)
  2. R. V. Krishnaiah and P. Swathi, “A Frequent Pattern Analysis for Targeted Activity Pattern Mining in Complex Data,” International Journal of  Computer Electrical and Advanced Communication Engineering, Vol. 1, Issue 3, pp. 20 - 24, July - Dec. 2012.(ISSN: 2250–3129)
  3. R. V. Krishnaiah and B. Shivaprasad, “Cluster Distance Bound for High Dimensional Indexing,” International Journal of Engineering Research & Technology, Vol. 1 Issue 9, pp. 1 - 7, Nov.2012. (ISSN: 2278-0181, Google Scholar Indexed, Impact Factor: 1.76)
  4. R. V. Krishnaiah and K. Krishna Jyothi, “Operating Stoop for Efficient Parallel Data Processing in Cloud, Research Inventy,” International Journal of  Engineering and Science, Vol. 1, Issue 10, pp. 11 - 15, Dec. 2012.(ISBN: 2319-6483, ISSN: 2278-4721, Google Scholar Inndexed)
  5. Madala Venkatesh and R.V.Krishnaiah, “Navigation Cost Modeling Based on Ontology,” Journal of Computer Engineering, Vol. 4, Issue 3, pp. 34 - 39, Sep.  -  Oct. 2012.(ISSN: 2278 - 0661(Online), ISSN: 2278 – 8727 (Print), Google Scholar Indexed)
  6. N. Lavanya, V. Manjula, and N.V. KrishnaRao, “Robust and Secure Data Hiding in Image using Biometric Technique,” International Journal of Computer Science and Information Technology, Vol. 3,  Issue 5, pp. 5133-5136, 2012. (ISSN: 0975-9646)
  7. J. Rajani, “Analysis of Intrusion Detection & Emergence in Intermittently Connected Networks,” International Journal of Computational Intelligence and Information Security, Vol. 3, Issue 4, pp. 54 - 62, Apr. 2012. (ISSN: 1837 – 7823)
  8. J. Rajani and D. Rajani, “A Novel Approach for Secured Symmetric Key Distribution in Dynamic Multicast Networks,” International Journal of Engineering Research and Applications, Vol. 1, Issue 5, pp. 35 - 39, Sept. 2012. (ISSN: 2248 – 9622, Google Scholar Indexed, Impact Factor: 1.69)
  9. V. Manjula, J. Rajani, and Radhika, “A Secure Data Hiding Technique in Compressed Video Using A Secret Key,” International Journal of Computer Science and Information Technologies, Vol. 3, Issue 5, pp. 5097 - 5100, Oct. 2012. (ISSN: 0975 – 9646, Google Scholar Indexed)
  10. Aravind Vishnubotla and P. G. Krishna Mohan, “Ground Station Design,” International Journal of Recent Technology Engineering (IJRTE), Vol. 1, pp. 25 - 28, Apr. 2012. (ISSN: 2277 – 3878, ISI Indexed, Impact Factor: 3.36)
  11. Major B. Bhisha Pathy, V. M. Pandaripand, and P. G. Krishna Mohan, “Mobile Path Loss Slope for Indian Suburban Areas,” Indian Journal of Science and Technology, Vol. 7, Aug. 2012. (ISSN: 0974-6846, DOI: 10.17485/ijst/2012/v5i8/30523, Scopus Indexed, Impact Factor: 0.86 )
  12. S. Ranjitha, K. Vijay Bhaskar, and R. Surya Prakash, “Design and Verification Eight Port Router for Network on Chip,” International Journal of Advanced Research in Computer Engineering & Technology, Vol. 1, Issue 5, pp. 345 - 349, July, 2012. (ISSN: 2278 – 1323, Google Scholar Indexed, Impact Factor: 3.869)  
  13. G. Umamaheswara Reddy and M. Muralidhar, “Removal of Electrode Motion Artifact in ECG Signals Using Wavelet Based Threshold Methods With Grey Incidence Degree,”  International Journal of Electronics Signals and Systems, Vol. 1, Issue 4, pp. 1 - 8, 2012. (ISSN: 2231 - 5284 (Online), Google Scholar Indexed)
  14. G. Umamaheswara Reddy, M. Muralidhar, and D. Vivek, “Removal Of Electrode Motion Artifact in ECG Signals Using Wavelet Based Threshold Methods with Grey Incidence Degree,” International Journal on Signal Processing, Vol. 6, Issue 4, 2012. (ISSN: 2231-5284, DOI: 10.18178/ijeee, Google Scholar Indexed)
  15. S. V. Padmaja Rani and M. Muralidhar, “Comparison of Parallel Prefix Adders Performance in an FPGA,” International Journal of Engineering Research and Development, Vol. 3, Issue 6, pp. 62 - 67, Sep. 2012. ISSN: 2278 - 067X (Online), 2278 - 800X (Print), Google Scholar Indexed. Impact Factor: 1.458)
  16. S. V. Padmaja Rani and M. Muralidhar, “A New Approach to Implement Parallel Prefix Adders in an FPGA,” International Journal of Engineering Research and Applications (IJERA), Vol. 2, Issue 4, pp.1524 - 1528, 2012.  (ISSN: 2248 – 9622, Google Scholar Indexed, Impact Factor: 1.69)
  17. P. Sridhar, “Neutral Current Wave Shape Analysis Using Wavelet for Diagnosis of Winding Insulation of a Transformer,” International Journal of Electrical Engineering & Computer Sciences, Vol. 20, pp. 835 - 841, 2012. (DOI:10.3906/elk-0908-152, Impact Factor: 0.223)
  18. P. Sridhar, “DSTATCOM and a T - Connected Transformer for Power Quality Improvement for Various Loads,” International Journal of Engineering & Science Research, Vol. 2, No. 12, pp. 2104 - 2114, Dec. 2012. (ISSN: 2277 - 2685 (Online),  2320–9763 (Print), Google Scholar Indexed, Impact Factor: 3.47)
  19. P. Sridhar, “Neural Current Wave Shape Analysis for Diagnosis of Winding Insulation of Transformer Using Wavelet Approach,” Turk Journal of Electrical Engineering & Computer Science, Vol. 20, Issue 6, 2012. (ISSN: 1303 - 6203 (Online), 1300 - 0632 (Print), SCI Indexed, Impact Factor: 0.518)
  20. N. Jaya Madhuri, P. S. Naidu, J. Glory, and K. Ravindra Prasad, “Behaviour of Benzonitrile in the Binary of 2 - Butoxy Ethanol + n - propanol – An Ultrasonic Investigation,” International Journal Life Science & Pharma  Research, Vol. 2, Issue 3, pp. 267 - 274, 2012. (ISSN: 2250 – 0480, Google Scholar Indexed, Impact Factor: 0.672)
  21. N. Jaya Madhuri, J. Glory, P. Subramanyam  Naidu, and K. Ravindra Prasad, “Ultrasonic Velocity, Density and Viscosity  Studies in the Aqueous Solutions of Hydrate Compounds,”  Research Journal of Pharmaceutical, Biological and Chemical Sciences,  Vol. 3, Issue 2, pp. 861 - 866, 2012. (ISSN: 0975-8585, Google Scholar Indexed, Impact Factor: 0.35)
  22. J. S. R. Prasad, Dominik H. Lang, and Yogendra Singh,“Comparing Empirical and Analytical Estimates of Earthquake Loss Assessment Studies for the City of Dehradun, India,” Earthquake Spectra (Journal of the Earthquake Engineering Research Institute), Vol.  28, Issue 2, pp. 595 - 619, May 2012. (DOI: 10.1193/1. 4000004)
  23. R. Santhana Krishnan, P. K. Dash, A. Joseph Stanley and M. Sabarish, “Flexural Property Evaluation of GFRP  -  Foam Sandwich Composite  -  An Experimental Approach,” Journal of Engineering and Applied Sciences, Vol. 7, No. 10, pp. 1300 - 1306, Oct. 2012. (ISSN: 1819 – 6608, Impact Factor: 0.68)
  24. J. Sandeep, K. Bharadwajan, M. Y. Ali, P. V. Ramana Murti, and T. Tirupathi “Investigation of Supersonic Combustion with Cavity Based Injection in a SCRamjet Combustor,” International Journal of Research in Engineering & Applied Sciences, Vol. 2, Issue 2, pp. 1258 - 1268, Feb. 2012. (ISSN: 2249 - 3905 (Online), 2349 - 6525(Print), Google Scholar Indexed)
  25. Dalbir Singh and P.K. Dash, “Role of Damage Parameters in Remaining Life Assessment of Composites in Aircraft Structures,” Journal of Procedia Engineering, Vol. 38, pp. 2702–2712, 2012. (ISSN: 1877-7058,  DOI:10.1016/j.proeng.2012.06.317, Scopus Indexed)

Conference Publications

  1. Y. Mohana Roopa and  K.Sangeetha Supriya, “Mobility Scenario - Based Performance Evaluation  of  Preemptive DSR Protocol for MANET,” National Conference organized by Sri Padmavati Mahila Viswavidhyalayam, Tirupati, Nov. 2012
  2. K. Sumalatha, C.Bhanu Prakash, Y. Mohana Roopa, and R.Siva, “Selection of Architectural Styles sing Analytic Network Process,” National Conference, Rajampet, Andhra Pradesh, India, Oct. 2012.
  3. Y. Mohana Roopa, “Multiobjective Particle Swarm Optimization for Information Systems and Systems in Component Based Systems,” International Conference, Bangalore, India, Sept. 2012.
  4. K. Sumalatha, C. Bhanu Prakash, Y. Mohana Roopa, and R. Siva, “Selection of Architectural Styles using Nalytic Network Process,” National Conference, Rajampet, Andhra Pradsh, India, Oct. 2012.
  5. Vijaya Kumar Kolavella and P.G. Krishna Mohan, “Multiview Distributed Video Coding,” IEEE International Conference on Devices Circuits & Systems (ICDCS - 2012), Tamilnadu, India, Mar. 15 - 16, 2012.
  6. Vijaya Kumar Kolavella and P. G. Krishna Mohan, “Chroma Components Coding in Feedback - Free Distributed Video Coding,” IEEE International Conference on Devices Circuits & Systems (ICDCS - 2012), Tamilnadu, India, pp. 1 - 6, Mar. 15 - 16 2012.(DOI: 10.1109/IMSAA.2011.6156347)
  7. P. V. Jayasri, K. Niharika, P. Kesavarao, H.S.V.U Sundari, S. H. Priya, E. V. S. S Kumari, A. V. V Prasad, and D. S. Jain,  “Development of Conventional and Polarization Specific Corner Reflectors and Their Deployment For Calibration Of RISAT1 - SAR,” International Conference on Microwaves, Antenna Propagation and Remote Sensing, Jodhpur, India, 2012.
  8. N. Rajeswara Rao, T. Venkatappa Rao, S.V.S. Ramana Reddy, and B. Sanjeeva Rao “Radiation Effects in Starch and Carboxymethyl Starch,” International Conference on Advanced Polymeric Materials, Ahmadabad, Gujarat, India, 2012.
  9. D. Prudhvi Raju, “Fine - Tuning Teacher Feedback to Enhance Student Writing: A Case Study,” International Conference on Assessing and Evaluating English Language Teacher Education, Teaching and Learning, Hyderabad, India, Mar. 3 – 5, 2012.
  10. D. Prudhvi Raju, “Second Language Learning Through Writing,” International Conference on Applied Linguistics, Andhra Pradesh, India, Apr. 2 - 4, 2012.
  11. V. Sreeharibabu, C. Venkata Subbaiah, and A. Jayanth Kumar, “Intensity Modulated Fiber Optic Chemical Sensor,” International Conference on Fiber Optics, Tamilnadu, Dec. 9 - 12, 2012.(ISBN: 978-1-4673-4718-1 (Online), 978-1-4673-4718-1 (Print)