List of Faculty Publications

1 January, 2016 to Till date

  1. V. Srinivas, Ch. V. K. N. S. N. Moorthy, V. Dedeepya, P. V. Manikanta, and V. Satish, “Nanofluids with CNTs for Aomotive Applications,” Journal of Heat and Mass Transfer, Springer Berlin Heidelberg, Springer, Vol. 52, Issue 4, pp. 701-712, April 2016. ISSN: 0017-9310
  2. Ch. V. K. N. S. N. Moorthy and Vadapalli Srinivas, “Corrosion and Heat Transfer Characteristics of Water Dispersed with Carboxylate Additives & Multi-walled Carbon Nano Tubes,” Journal of the Institution of Engineers (India): Series C, Springer India, Springer online first, pp. 1 - 9, 27th February, 2016. ISSN: 2250-0553 (Online), ISSN: 2250-0545 (Print)
  3. K.  Baburaja, K. Venkata Subbaiah, T. Vanaja, and N. N. Ramesh, “Resultant Surface Roughness Aluminium and Hastelloy C-276, using Wire Electro Discharge Machining,” International Conference of Materials and Characterization, Hyderabad, India, Mar. 12-15, 2016.

 

1 January, 2015 to 31 December, 2015

  1. V. Pitchi Raju, D. Govardhan and M. Manzoor Hussain, “Mechanical Behaviour of Rotary Friction Surfaced Aluminum Deposit on Low Carbon Steel,” The International Journal of Mechanical Engineering, Vol. 8, Issue 1, July - Dec. 2015. ISSN: 2348   -   8360  (Online), 2349 – 9168 (Print)
  2. D. Govardhan and K. Sammaiah, K.G.K .Murti, G. Madhu Sudhan Reddy, “Evaluation of Bond Quality for Stainless Steel - Low Carbon Steel Friction Surfaced Deposit,”   International Conference on Material Characterization and Processing, Hyderabad, India, Mar. 14 - 15, 2015. DOI: 10.1016/j.matpr.2015.07.327
  3. V. Pitchi Raju, M. Manzoor Hussain, and D. Govardhan, “Effect of Process Parameters on the Height of the Friction Surfaced Tool Steel M2 Deposit over Low Carbon Steel,” International Journal of Emerging Technology and Advanced Engineering, Volume 5, Issue 6, pp. 241 - 245, June, 2015. ISSN: 2250  -  2459
  4. V. Pitchi Raju, M. Manzoor Hussain, and D. Govardhan, “Effect of Process Parameters on Surface Roughness of Tool Steel M2 Deposit Over Low Carbon Steel Produced by Friction Surfacing,” IRF International Conference, Chennai, India, pp. 70 - 74, July 2015. ISBN: 978  -  93  -  85465  -  63  -  5
  5. U. S. P Rao, “Automobile Fuel Saver,” International Journal of Research in Mechanical Engineering and Technology, Vol. 5, Issue 5, pp. 43 - 45, Apr. 2015. ISSN: 2249  -  5762 (Online),  ISSN : 2249  -  5770 (Print)
  6. U. S. P. Rao, “Selection of Welding Process for Aero Space Application,” National Conference on Advances in Mechanical Engineering, pp. 1 - 5, May 1 - 2, 2015.
  7. Shaik Shafee, B. Balu Naik, and K. Sammaiah, “Resistance Spot Weld Quality Characteristics Improvement by Taguchi Method,” International Journal, Materials Today, Vol. 2, pp. 2595 - 2604, 2015. ISSN: 2214  -  7853
  8. D. Govardhan and K. Sammaiah, “Experimental Investigation on Friction Surface Aluminum on Mild Steel Structures” International Journal of Engineering and Research and Applications, ISSN: 2248 - 9642, Special Issue, pp. 56 - 60, Jan. 9 - 10, 2015. ISSN: 2248  -  9642
  9. N N Ramesh, K Harinarayana, and B Balu Naik, “Machining Characteristics of HSS and Titanium unsing Electro Discharge Sawing and Wire -  Electrodischarge Machining” Procedia Materials Science, Vol. 2, Issue 6, ISSN:2211 - 8128, pp. 1254 - 1259, 2015. ISSN: 2211  -  8128
  10. U. S. P. Rao,  “Automobile Fuel Saver,” International Journal of Research in Mechanical Engineering & Technology, Vol. 5, Issue 1, Nov. 2014 – Apr. 2015. ISSN: 2249  -  5762 (Online),  ISSN: 2249  -  5770 (Print)
  11. D. Govardhan, K. Sammaih, KGK Murti, G. Madhusudhan Reddy, “Evaluation of Bond Quality for Stainless Steel -  Carbon Steel Friction Deposits,” International Conference on Materials Processing and Characterisation, Hyderabad, pp. 99 - 103, Mar. 2015. DOI: 10.1016/j.matpr.2015.07.327
  12. Y Shivraj Narayan, N N Ramesh, B Balu Naik, and A Ramya, “Realization of Surface Morphology And Process Parameter Optimization in MicroEDM Hole Drilling of Maraging Steel 300 Alloy,” International Mechanical Engineering Congress & Expositon, Houston, Texas, USA, pp 1 - 4, Nov. 13 - 19 , 2015.
  13. KGK Murti, “Selection of Welding for Aero - Space Applications,” National Conferecne on Advances in Mechanical Engineering, Hyderabad, India, pp. 1 - 5, May 1 - 2, 2015.

 

1 January, 2014 to 31 December, 2014

  1. A Somaiah, M Indira Rani, and Ch Varun Kumar, “Particle Swarm Optimization Algorithm foe Machine Loading Problem in FMS,” Indian Journal of Applied Research , Vol. 4, Issue 8,  ISSN 2249 - 55X, pp 261 - 263, Aug. 2014. ISSN: 2249  -  55X
  2. Shaik Shafee, B Balu Naik, K Sammaiah,  Mohd Mohinoddin, “Influence of Welding Parameters on Nugget Formation in RSW Process,” International Journal of Emerging Technology and Advanced Engineering, Vol 4 Issue 6, pp. 906 - 912, June 2014.  ISSN: 2250  -  2459
  3. Shaik Shafee, B Balu Naik, K Sammaiah, and Mohd Mohinoddin, “RSW Process Parameters Optimisation by Taguchi Method,” IOSR Journal of Mechanical and Civil Engineering, Vol. 11, Issue 5, ISSN:2278 - 1684, pp. 46 - 54, Sep. -  Oct. 2014. ISSN:2278  -  1684
  4. Shaik Shafee, B Balu Naik, K Sammaiah,  and Mohd Mohinoddin, “Study on Nugget Development RSW Process with Flat Ti Cylindrical Electrode,” IOSR Journal of Mechanical and Civil Engineering, Vol 11, Issue 5, pp. 09 - 17, Sep - Oct. 2014. ISSN: 2278  -  1684
  5. K Sammaiah, N N Ramesh, D Govardhan, and V V S H Prasad, “Determination of Weld Loads by Using Design of Experiments for Low Carbon Steel Sheet for Automobile Application,” International Journal of Emerging & Advanced Engineering, Vol. 4,  Issue 2, Feb. 2014. ISSN: 2250  -  2459
  6. T Vanaja and  VVSH Prasad, “Experimental Estimation of Cutting Forces Using Striang Gauge Principle,” International Conference on Advances in Mechanical Sciences, Hyderabad, India,  Jan 9 - 11, 2014.
  7. N. Santhi Sree and VVSH Prasad, “Performance of Four stroke Multi Cylinder Petrol Engine with Gasoline and LPG,” International Conference on Advances in Mechanical Sciences, Hyderabad, India,  Jan 9 - 11, 2014.
  8. VVSH Prasad, N. Ananth, D. Mahesh, MDA Miyan, R. Banjare, and VV Nath, “Design Optimization Using Genetic Algorithm and Validation in ANSYS,” Paripex – Indian Journal of Research, Vol.3, No. 4, pp. 262 -  264, 2014. DOI: 10.15373/22501991/April2014/44
  9. Krishna Mohan and N. Ananth, “Aspect Ratio Optimization & Modal Analysis of Plate by Integrating PSO in MATLAB with ANSYS – An Automation Approach,” Indian Journal of Applied Research, Vol. 4, No. 3, pp. 170 – 173, 2014. ISSN: 2249  -  555X
  10. KGK Murti, “Problems and Solutions for Joining  of Dissimilar Materials for Industrial Applications,” A Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India,  pp. 21 - 27, Mar. 18 - 19, 2014.
  11. KGK Murti, “Automation Applied to Tube and Pipe Welding Applications,” National Conference on Advances in Mechanical Engineering, Hyderabad, India, 2014.
  12. Kancha Sammaiah, KGK  Murti, D. Govardhan and VVSH Prasad, “Study and Direct Spot Welding Process for Low Carbon Steel Sheet for Industrial Applications by Using Design of Experiments,” A Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India, Mar. 18 - 19, 2014.
  13. N. Santhi Sree and G Prasanth Kumar Reddy, “Enhancement of Heat Tranfer by Nano Fluids in Solar Collectors,” A Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India,  pp. 76 - 81, Mar. 18 - 19, 2014.
  14. D Govardhan, K Sammaih, KGK Murti,VVSH Prasad, and G Madhusudhan Reddy, “Friction Surfacing Applications for Critical Components,” Natiional Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India,  pp. 37 - 41, March 18 - 19, 2014.
  15. T Vanaja, N Ananth VVS Haranadh Prasad, and N. N. Ramesh “Investigation of Tribological and Mechanical Properties of Metal Bearings,” National Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India,  pp. 43 - 47, Mar. 18 - 19, 2014.
  16. Shaik Shafee, B Balu Naik, and K Sammaiah, “Resistance Spot Weld Quality Characteristics Improvement By Taguchi Method,” National Conference on Energing Trends in Science Technology and Management, Hyderabad, India, Sept. 2014.
  17. Shaik Shafee, B Balu Naik, K Sammaiah,  and Mohd Mohinoddin, “Effect of Electrode Force on Spot Weld Quality,” National Conference on Energing Trends in Science Technology and Management,  Hyderabad, India, pp. 157 - 162, 2014.
  18. N Ashiwitha and G J Sai Charan, “Shape Memory Alloy,” National Conference on Emerging Technologies in Material Sciences and Engineering, Hyderabad, India,  pp. 60 - 63, Mar. 18 - 19, 2014.

 

1 January, 2013 to 31 December, 2013

  1. C Labesh Kumar, S Ravinder Reddy, K Sai Ram, and P Janaki Ramulu, "A Statistical Study on Supply Chain in Iron foundry," International Symposium on Advances in Automotive Technology, pp. 33 - 35, 2013.
  2. S. Ravinder Reddy, N. Jeevan Kumar, C. Labesh Kumar, and P. Janaki Ramulu, “High Velocity Impact on Composite Panels Made of Fiber Reinforced Plastics Using FEM Analysis,” International symposium on Advances in Automotive Technology, pp. 36 - 41, 2013.
  3. N N Ramesh,, “Investigating the Effects of Machining Parameters on Microdrilling  of Titanium Grade 19 Alloy,” International Congress & Exposition,  San Diego, CA, USA, Nov. 15 - 21 , 2013.
  4. N N Ramesh,“Morphology of Machines Surfaces From Electro Discharge Swaing and Sinking Electro Discharge Machining,” International Conference on Aerospace Mechanical Automotive and Materials Engineering, WASET Conference, Dubai, Vol. 7, pp. 1157 - 1160, Jan. 30 - 31, 2013. DOI: scholar.waset.org/1999.8/13203
  5. N N Ramesh,  “Morphology of Machines Surfaces from Electro Discharge Sawing and Sinking Electro Discharge Machining,” World Academy of Science, Engineering & Technology, Vol. 7, Issue 1,  pp. 825 - 828, 2013. DOI: scholar.waset.org/ 1999.8/13203
  6. N N Ramesh, “Experimental Design and Analysis of Relative Effects of Variable Factors on Electo Discharge Sawing Process Using Taguchi Approach,” Trans Tech Publications, Switzerland, Applied Mechanics  and Materials, Vol. 3,  pp. 299 - 303, 2013. 
  7. Krishna Mohan, and N Ananth, “Reliability Based Design of Laminated Composites – A New Approach,” Global Research Analysis, Vol. 2, No. 11, pp. 44 – 46, 2013. ISSN: 2277–8160
  8. V Satish Kumar, N N Ramesh, Ch Srinivas, and R Lalitha Narayana, “ Electro Discharge Sawing vis a vise Electrodischarge Machining”, International Journal of Engineering Research and Technology, Vol 2, Issue 10, pp. 89 - 94, 2013. ISSN: 2278  -  0181
  9. K. Hairnarayana, B. Balu Naik , and N. N. Ramesh, “ Study of Investigation on Process Parameters of Electro Discharge Sawing Using Taguchi Approach,” International Journal of Engineering Research and Technology, Vol 2, Issue 7, 2013. ISSN: 2278  -  0181   
  10. N. N. Ramesh, Morphology of Machines Surfaces from Electro Discharge Sawing and Sinking Electro Discharge Machining, World Academy of Science, Engineering & Technology, Vol. 7,  Issue 1, pp. 825 - 828, 2013. DOI: scholar.waset.org/ 1999.8/ 13203
  11. K. Srinivasa Vadayar, G. Poshal, and V.V. Bhanu Prasad, “Pressureless Sintering of Titanium Matrix Composites,” Technology Spectrum, Vol. 5, Issue 1,   pp. 78 - 82, 2013.