Laboratories

The laboratories in department of Electronics and Communication Engineering are intended to give practical experience to the students. Laboratories are useful for students to implement the theory in practical aspects and helps student to apply their knowledge of theory for various courses of their course outcomes.

ECE is equipped with highly developed Air Conditioned hardware and software labs, that have superior quality and sophisticated equipment and trainer kits that allows students to design, implement and think beyond horizon.

ECE finds its application both in hardware and software these days. Most of the experiments are conducted using both hardware and software tools. All the laboratories are equipped with variety of software tools which are necessity of today’s industrial requirement.

The department has its own computer laboratory, possessing computers of Intel Pentium i3/i5 processors, connected over campus LAN with high speed Internet connection.

Detail of various laboratories and their facilities are as follow:

HARDWARE LABS

  • Microwave Engineering Lab
  • Analog Communication Lab
  • Digital Communication Lab
  • Electronics Devices and Circuit Lab
  • Electronic Circuits and Pulse Circuits Lab
  • Basic Electrical and Electronics Engineering Lab
  • PCB Design Centre
  • Digital Logic Design Lab
  • Embedded Systems Lab
  • Microprocessors and Microcontrollers Lab
  • Integrated Circuit Applications Lab
  • Fiber optics Communication Lab

CAD TOOL LABORATORIES

  • Basic Simulation Lab
  • Digital Image Processing Lab
  • Digital Signal Processing Lab
  • Digital System Design Using HDL Lab
  • LabVIEW academy
  • Analog and Digital CMOS IC Design Lab
  •  

    PCB Design Centre

    This lab is designed to train the students on Printed Circuit Board (PCB) design and incorporated in the curriculum with the intent of giving the students hands-on experience of designing and testing PCB. Apart from this, students come to know about fabrication techniques.

    Facilities:  MITS Eleven Lab Antenna/PCB proto typing Machine,Intel Dual Core CPU systems with 18" colour monitor.

  •  

    Analog Communication Lab

    This laboratory provides a platform to the students to understand the basics of analog communication systems, modulation techniques, data transmission, multiplexing.

    Facilities: (0-500) MHz Spectrum Analyzer(1No), (0-25)MHz Cathode Ray Oscilloscope (18 No’s), (0-300)MHz Radio Frequency Signal Generator(1 No), (0-1)MHz Function Generator(20 No’s), (0-30)V DC Regulated Power Supply(2 No’s), Digital Multimeters(6 No’s), Amplitude  Modulation & Demodulation kits(12No’s), Frequency  Modulation & Demodulation kits(12No’s), Single Side Band & Supressed Carrierkits(12No’s), Double Side Band & Supressed Carrier kits(12No’s), Pre Emphasis De Emphasiskits(7No’s), Time Division Modulationkits(12No’s), Sampling  Theoremkits(12No’s), Frequency Division Multiplexingkits(12No’s), Pulse Amplitude Modulationkits (9No’s), Pulse Width Modulation kits(12No’s), Pulse Position Modulationkits(12No’s), Synchronous Detectorkits(12No’s), Automatic Gain Control kits(11No’s), Frequency Synthesizer kits(6No’s), phase-locked loop Kits(6 No’s), Mixer Kits(3 No’s), circuit components like resistors, capacitors.

    18 number of INTEL Core I3 systems with 18" colour monitor, MATLAB R2015a licensed software

  •  

    Digital Communication Lab

    In this lab, the students are intended to learnthe techniques that are involved digital communication systems like phase shift keying, frequency shift keying, etc. and to provide hands-on experience with the components and sub-systems of digital communications.

    FacilitiesPulse Code Modulation kits (4 No’s), Phase Shift Keying kits (4 No’s), Frequency Shift Keying kits (4 No’s), D-Phase Shift Keying kits (4 No’s), D-Pulse Code Modulation kits (4 No’s), Delta Modulation kits (4 No’s), Amplitude Shift Keying kits (2 No’s), Q-Phase Shift Keying kits (1 No), Pulse Amplitude Modulation kits (3 No’s), Digital Time Division multiplexing Modulator Kits(3 No’s), Quadrature Amplitude Modulation kits(2No’s), (0-500)MHz Radio Frequency Signal Generator(1 No), (0-20)MHz Cathode Ray Oscilloscope(9 No’s), (0-30v) DC Regulated Power Supply(4 No’s), (0-1)MHz Function Generator(5 No’s).

  •  

    Electronics Devices and Circuit Lab

    This lab mainly focuses on semiconductor device physics. The students get familiarized with the analysis and design of circuits by using semiconductor devices like diodes, transistors, FETs, SCRs, and UJTs.

    Facilities: (0-30)V Dual DC Regulated Power Supply(08 No’s), (0-30) MHz Cathode Ray Oscilloscope(18 No’s), (0-1)MHz Function Generator(18 No’s), Digital Voltmeter(20 No’s), Digital milli-Ammeters(20 No’s), Digital micro-Ammeters(20 No’s), Digital Multimeters (12 No’s), Decade Resistance Box(15No’s), Semiconductor Trainer Kits With On Board Transformer (18 No’s), Circuit components for implementing Diodes(100 No’s), Transistors(100 No’s), FET (50 No’s), SCR(50 No’s) and UJT(50 No’s)based circuits.

  •  

    Electronic Circuits and Pulse Circuits Lab

    In this lab, the students are emphasized to design and analyse the electronic circuits as well as pulse digital circuits and are supposed to co-relate it theoretically. The students learn to obtain different parameters in the circuits.

    Facilities:  Digilent Analog Discovery kits(100 MSPS USB oscilloscope, logic analyzer, variable power supply, and multi-function instrument) (30 No’s),(0-30)V Dual DC regulated power supply(8No’s), (0-30)MHz Cathode Ray Oscilloscope(18No’s), (0-1)MHz Function Generator(18No’s), Digital Multimeters (8No’s), LCR Meter(1No), RC Phase Shift Oscillator kits(12No’s), Current Shunt and Voltage Series Feedback Amplifier Kits(12No’s), Power Amplifier kits(12No’s), Tuned Amplifier kits(9No’s), Semiconductor kits(9No’s), Circuit Components -  Diodes, BJT,FET, UJT, Resistors, Inductors, and Capacitors.

    30 number of INTEL Core I3 systems with 18" colour monitor, National Instruments Multisim(NI-13)licensed simulation software.

  •  

    Basic Electrical and Electronics Engineering Lab

    In this lab, students get familiarized with the circuit and network analysis using basic components like RLCs. Students come to know to calculate voltage and current in basic circuits. They also verify Kirchhoff’slaws, Superposition theorem, Thevenin’s Theorem, and maximum power transfer Theorem in this course.

    Facilities: (0-30)V DC Regulated Power Supply (8No’s), (0-20)MHz Cathode Ray Oscilloscope (10No’s), Digital Voltmeter(20No’s), Digital Ammeter(20No’s), Digital Multimeters (5No’s), Semiconductor Trainer Kits(10No’s), Single Phase Auto Transformer(02No’s), Three Phase Auto Transformer(1No), DC Shunt Motor With Break(1No), Low Power Factor Wattmeter(2No’s), Circuit Components for implementing Diodes, Transistors based circuits.

  •  

    Microwave Engineering Lab

    The laboratory is designed to get the exposure to various microwave components, microwave benches in this lab. This laboratory helps the students understand the basics of Microwave engineering and gives a detailed description of the working principle of microwave components.

    Facilities: Klystron Based Microwave Bench Setup(5 No’s), Gun-diode Based Microwave Bench Setup(2 No’s), Voltage Standing Wave Ratio Meter(7 No’s), Slotted Line(6 No’s), Magic Tee(2 No’s), Circulator(2 No’s), Directional Coupler(2 No’s), Variable Attenuator(7 No’s), Matched Terminator(7 No’s), Isolator(7 No’s), Frequency Meter(6 No’s), Klystron Power Supply(5 No’s), Klystron Tube(5No’s), Detector Mount(7 No’s), Wave Guide Stands(25 No’s), Movable Shot(4 No’s), (0-1)MHz Function Generator (5 No’s), Digital Multimeters(5 No’s), Micro Ammeter (3).

  •  

    Digital Logic Design Lab

    This lab drives the students to emphasize on Nanoelectronics. This lab also develops keen interest in digital circuit designing. Prior to this designing part, students are supposed to analyse the digital logic families and design various circuits & systems by using these logic families.

    Facilities: Digital IC Trainer with built-in clock generator and I/O ports (18 No’s), 30-40 varieties of 74 series TTL Integrated Circuits Components like IC 7483, 7485, 74180, 7411, 7476, 7400, 7402, 7404, 7406, IC 7408, 7432, 7486

  •  

    Embedded Systems Lab

    The primary objective of embedded system lab is to provide students thorough knowledge of real-time operating systems, real-time debugging, and embedded systems.

    Facilities: 8051 Based Development Boards (15No’s), ARM7 Based Development Boards (6No’s), ARM9 based Development Boards (2No’s), ARM Cortex M3 (15No’s), Joint Test Action Groupconnectors (15No’s), Programmable System-on-Chip(PSOC) Development Board (5No’s), 8051 Real Time Operating System Development Board (15No’s).

    18 number of INTELDual Core CPU systems with 18" colour monitor, KEIL µV4, TALK licensed software tool.

  •  

    Microprocessors and Microcontrollers Lab

    The microprocessor lab helps the students to gain a better understanding of 8086 microprocessors. Students are able to execute basic assembly language programs as well as interface ADC, DAC and stepper motor through various interface cards available in the lab.

    Facilities:  Intel 8086 Microprocessor kits with keyboards (40No’s), Intel 8051 Trainer Kits with Keyboards (40No’s), Serial Interface Cable (40No’s), and interfacing modules for 8086 Microprocessor like Stepper Motor (30No’s), 8-Channel 8-Bit Analog To Digital Converter (14No’s), Dual Digital To Analog Converter (14No’s), 8-Channel 8-Bit Analog To Digital Converter & Dual Digital To Analog Converter (27No’s), Programmable Peripheral Interface-8255(12No’s), Universal Synchronous/Asynchronous Receiver/Transmitter-8251(14No’s), Traffic Light Controller (3No’s), Real Time Clock / Tone Generator (3No’s), Elevator (2No’s), Static random-access memory&Dynamic random-access memory (2No’s) and Direct memory access Controller (1No’s), Interfacing Modules for 8051 Microcontroller likeLiquid Crystal Display(40No’s), Timer/Counter, UART & Interrupt (44No’s), and Matrix Keyboard (40No’s).

    18 number of Intel Core I3 systems with 18" colour monitor, MASM open source assembler. 

  •  

    Integrated Circuit Applications Lab

    This lab aims at teaching the students about Linear Integrated Circuit design using 555 Timer, phase-locked loop and implementing those circuits in real time applications.

    Facilities(0-30)V Dual DC Regulated Power Supply (5No’s), (0-1)MHz Function Generator (18No’s), (0-25)MHz Cathode Ray Oscilloscope (16No’s), Digital Multimeters(8No’s), Digital Integrated Circuit Trainer with built-in clock generator (10No’s), Digital Integrated Circuit Tester (1No’s), 555 Timer based Monostable and Astable Multivibrator Kits (12No’s), Schmitt Trigger Kits (12No’s), Phase-Locked LoopKits (3No’s), IC723Voltage Regulator (9No’s), Wave Form Generator (9No’s), Active Filters (9No’s), Integrator and Differentiator (8No’s), IC Components (50No’s) Like 741,555,565,723,7912,7809,7805. 

  •  

    Fiber optics Communication Lab

    With the help of advanced fiber optic trainer kits available in the lab, students learn to design fiber optic link for short haul and long haul by choosing various parameters and components.

    Facilities: TNS20EA light-emitting diode characteristics (2No’s), TNS20EL LASER diode characteristics (2No’s), TNS20RDFiber optic digital linear (2No’s), (0-1)MHz function generator (1 No’s).

  •  

    Basic Simulation Lab

    Understanding of frequency and time domain analysis of linear dynamic systems and corresponding signals, finding the response of continuous- and discrete-time linear systems via simulation using MATLAB.

    Facilities: 36 number of INTEL Core I3 Processor-6100 CPU@ 3.75GHZ, 4GB RAM, 500 GB HDD systems with 18" color monitor, MATLABR2015a licensed software with signal processing, filter design tool box.

  •  

    Digital Image Processing Lab

    The objective of Digital Image Processing lab is to illustrate concepts in image processing and analysis through actual processing of images using MATLAB

    Facilities:  36 number of INTEL Core I3 processor-6100 CPU@ 3.75GHZ, 4GB RAM, 500 GB HDD systems with 18" color monitor, MATLABR2015a licensed software with image processing tool box.

  •  

    Digital Signal Processing Lab

    The Digital Signal Processing Lab is based on MATLAB tools which are used to evaluate the effectiveness of Fast Fourier Transform algorithms in Discrete Fourier Transform implementation. We can also do the analysis of digital filter design of Finite Impulse Response and Infinite Impulse Response filters.

    Facilities:  36 number of INTEL Core I3 processor-6100 CPU@ 3.75GHZ, 4GB RAM, 500 GB HDD systems with 18" color monitor, MATLAB R2015a licensed software with image processing tool box, 18 number of Embedded Target Board TMS 320C6713 DSP with code composer studio, (0-20)MHz Cathode Ray Oscilloscope(6 No’s), (0-100)KHz Function generators(10 No’s).

  •  

    Digital System Design Using HDL Lab

    The purpose of Digital System Design laboratory is to make learn languages like Verilog and VHDL. VHDL is used in electronic design automation to describe digital and mixed-signal systems such as field-programmable gate arrays and integrated circuits. Verilog, standardized as IEEE 1364, is a hardware description language used to model electronic systems. It is most commonly used in the design and verification of digital circuits at the register-transfer level of abstraction.

    Facilities:  36 number of INTEL Core I3 processor-6100 CPU@ 3.75GHZ, 4GB RAM, 500 GB HDDsystems with 18" color monitor, CADENCE VIRTUSO 6.1.6 and XLINIX ISE 9.1i licensed software, FPGA kits (10 No’s).

  •  

    LabVIEW academy 

    LabVIEW is an integrated development environment designed specifically for engineers and scientists building measurement and control systems. With a native graphical programming language, built-in IP for data analysis and signal processing, and an open architecture that enables integration of any hardware device and any software approach, LabVIEW is the software you need to build the optimal solution that can meet your custom requirements and solve the challenges at hand.

    Facilities: NImyDAQ kits (11 No’s), NImyRIOkits(11No’s), NI USRP2901 with accessories and cables.

    30 number of INTEL Core I3 processor-6100 CPU@ 3.75GHZ, 4GB RAM, 500 GB HDD systems with 18" color monitor, and National Instrument LabVIEW licensed software.

  •  

    Analog and Digital CMOS IC Design Lab

    This lab provides an opportunity for the students to learn Cadence and Virtuoso tools for automatic placement and routing as well as Design Rule Checking. Analog and Digital CMOS circuits are designed using this tool. 

    Facilities:  36 number of INTEL Core I3 processor-6100 CPU@ 3.75GHZ, 4GB RAM, 500 GB HDD systems with 18" color monitor, CADENCE VIRTUSO 6.1.6licensed software.

  •  

    Project & Research Lab

    This Lab has provided a platform for students and research associates to implement research based projects under the guidance of faculty members. The facility has been utilized by B.Tech and M.Tech students extensively for their project and research work. The outcome of the project has resulted in publications in various journals and conference proceedings (both at national and international level). The centre has provided a learning platform for both students and faculty.