List of Faculty Publications

1 January, 2016 to Till date

  1. A. Rathnan, and Pankaj Priyadarshini, “Trajectory and Aerodynamics of Spacecraft in Aero Braking,” National conference on Large Scale Multi-disciplinary Systems of National Significance, ISRO,  Sriharikota, 24 - 25 June 2016.

 

1 January, 2015 to 31 December, 2015

  1. S. Srikrishnan, P. K. Dash, S. Nandaraja Pillai, and S. Arunvinthan, “An Approach for Space Debris Cleaning Using Space Based Robots,” International Journal of Engineering Research And Management,” Vol. 2, Issue 6, pp. 51  -  54, June, 2015. ISSN: 2250  -  0758 (Online),  2394  -  6962 (Print)
  2. P. K. Dash, B. S. Murty, and R. B. Karthik Aamanchi, “Synthesis and Mechanical Characterisation of Aluminium  -  copper  -  Aluminia Nano composites Powder Embedded in Glass/Epoxy Laminates,” American Journal of Nano Materials, Vol 3, July 15, 2015. ISSN: 2372  -  3122 (Online),  2372  -  3114 (Print)
  3. P. K. Dash, “Fatigue Damaged Residual Flexure Strength of Plain Wave Bidirectional Carbon/Epoxy Composite: An Experimental Study,” International Conference on Fatigue, Durability and Fracture, May 30, 2015.
  4. P. K. Dash and V. Divya “Experimental Studies on the Effect of Fatigue Damage of Residual Flexural Strength of Plain Wheel Bi  -  Directional Epoxy Composites,” Cougent Engineering, Sept. 2015. ISSN:2331  -  1916
  5. V. Pitchi Raju, M. Manzoor Hussain, and D. Govardhan, “Effect of Process Parameters On Surface Roughness Of Tool Steel M2 Deposit Over Low Carbon Steel Produced By Friction Surfacing,” International Journal of Mechanical and Production Engineering,  Sept. 2015. ISSN: 2320  -  2092
  6. V. PitchiRaju, M. Manzoor Hussain, and D. Govardhan, “Effect of Process Parameters on the Height of the Friction Surfaced Tool Steel M2 Deposit Over Low Carbon Steel,” International Journal of Emerging Technology and Advanced Engineering, June 2015. ISSN: 2250  -  2459
  7. D. Govardhan and K. Sammaiah, K.G.K .Murti, and G. Madhu Sudhan Reddy, “Evaluation of Bond Quality for Stainless Steel  -  Low Carbon Steel Friction Surfaced Deposit,”   International Conference on Material Characterization and Processing, Hyderabad, India, Mar. 14  -  15, 2015. DOI: 10.1016/j.matpr.2015.07.327
  8. V. Pitchi Raju, M. Manzoor Hussain, and D. Govardhan, “Effect Of Process Parameters On Surface Roughness of Tool Steel M2 Deposit Over Low Carbon Steel Produced By Friction Surfacing,” IRF International Conference, pp. 70  -  74, Chennai, India, July 2015. ISBN: 978  -  93  -  85465  -  63  -  5
  9. V. Pitchi Raju, D. Govardhan and M. Manzoor Hussain, “Mechanical Behavior of Rotary Friction Surfaced Aluminum Deposit on Low Carbon Steel,” The International Journal of Mechanical Engineering, Vol. 8, Issue 1, July  -  Dec. 2015. ISSN:  0976 – 6359 (Online), 0976 – 6340  (Print)
  10. Y. V. Kishore Kumar Nethala and G. Sravanthi, “Multi  -  Disciplinary Design Optimization,” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 11, Nov. 2015. ISSN: 2319  -  8753 (Online), 2347  -  6710 (Print)
  11. Barai, “Role of Fluid Dynamics on Aeroelastic and Other Solid Fluid Interaction Problems,” All India seminar on “Civilian Applications of Aerospace Technologies, Mar. 27  -  28, 2015.
  12. C. Fazalul Rahman, and Iswarya Thiyagarajan “The Effect of Orientation of Vortex Generators on Aerodynamic Drag Reduction in Cars,” International Refereed Journal of Engineering and Science, Vol. 4, Issue 7, pp. 13  -  20, July 2015. ISSN: 2319  -  183X (Online),   2319  -  1821 (Print)
  13. T. Ishwarya, “CFD Analysis of Mini UAV for Aerodynamic Data Generation and Air Data Sensor Calibration,” International Journal of Engineering Science and Invention, 2015. ISSN 2319  -  6734,
  14. N. Y. V. Kishore Kumar and G. Sravanthi, “Analysis of Formability on Aerospace Grade Aluminium Alloys,” International Journal of Engineering Research and Technology, Vol.  4, Issue 10, pp. 342  -  347, Oct. 2015. ISSN: 2278  -  0181
  15. S. Srikrishnan, P.K. Dash, S. Nadaraja Pillai, and S. Arunvinthan, “An Approach for Space Debris Cleaning Using Space Based Robots,” International Journal of Engineering Research and Management, Vol. 02, Issue 06, pp. 675  -  679, June 2015. ISSN: 2349  -   2058
  16. E. Madhusudan Raju, L. Siva Rama Krishna, Y. Sharath Chandra Mouli, and V. Nageswara Rao, “Effect of Link Flexibility on tip Position of a Single Link Robotic Arm,” International Conference on Vibration Problems, Feb. 18&19, 2015. DOI: dx.doi.org/10.1088/1742  -  6596/662/1/012020

 

1 January, 2014 to 31 December, 2014

  1. M. Kumar, “Six Sigma DMAIC Framework for Enhancing Quality in Engineering Educational Institutions,” International Journal of Business and Management Invention, Vol. 3, Issue 1, pp. 36  -  40, Jan. 2014. ISSN: 2319  -  8028 (Online), ISSN: 2319  -  801X (Print)
  2. D. Govardhan, “Determination of Weld Loads by Using Design of Experiments for Low Carbon Steel Sheet for Automobile Applications,” International Journal of Emerging technology and advanced Engineering, Vol.  4, Issue 2, pp. 606  -  612, Feb. 2014. ISSN: 2250  -  2459
  3. D. Govardhan, “Friction Surfacing Applications for Critical Components,” National Conference on Emerging Technologies in Material Sciences and Engineering, Defense Metallurgical Research Laboratories, Hyderabad, Mar. 18, 2014.
  4. Barai, “Design and Analysis of Aircraft Bomb Release Mechanism Using Finite Element Method,” Defense Science Journal, DRDO, 2014.
  5. Y. B. Sudhir Sastry, Y. Krishna, Anirudh Koduganti,  “Flexural Buckling Analysis of Thin Walled Lipped Channel Cross Section Beams With Variable Geometry,” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 6, pp. 213  -  217, June 2014. ISSN: 2319  -  8753
  6. L. Ramanan, M. Kumar and KPV Ramanakumar, “Six Sigma DMAIC Framework for Enhancing Quality in Engineering Educational Institutions,” International Journal of Business and Management Invention, Vol. 3, Issue 1, pp. 36  -  40, Jan. 2014. ISSN: 2319  -  8028 (Online), ISSN: 2319  -  801X (Print)
  7. E. Madhusudan Raju, L. Siva Rama Krishna, Y. Sharath Chandra Mouli, and V. Nageswara Rao, “Design and Simulation of MEMS Vibration Sensor for Launch Vehicles” International Review of Applied Engineering Research, Vol. 4, No. 5, pp. 391  -  396, 2014. ISSN: 2248  -  9967
  8. Y. B. Sudhir Sastry, Y. Krishna, R. Budarapu Pattabhi, and Anirudh Koduganti,  “Flexural Buckling Analysis of Thin Walled T Cross Section Beams With Variable Geometry,” International Journal of Engineering Research and Technology, Vol. 2, pp. 256  -  260, 2014. ISSN: 2278  -  0181 (Online)
  9. Y. B. Sudhir Sastry, Y. Krishna, R. Budarapu Pattabhi, and Anirudh Koduganti, “Flexural Buckling Analysis of Thin Walled Lipped Channel Cross Section Beams With Variable Geometry,” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 1, No. 1, pp. 146  -  150, 2014. ISSN: 2319  -  8753
  10. E. Madhusudan Raju, L. Siva Rama Krishna, Y. Sharath Chandra Mouli, V. Nageswara Rao, “Analysis of Tip Position of A Single Link Flexible Robotic Arm,” National Conference on Emerging Trends in Mechanical Engineering,  Dec. 29&30, 2014. DOI: 10.13140/2.1.2733.0886
  11. Y. Sharath Chandra Mouli, Y. Surya Prakash, “Mathematical Modeling and Inherent Stability Analysis of a Flexible Joint RR Type Robotic Manipulator,” National Conference on Emerging Trends in Mechanical engineering, Dec. 29&30, 2014.
  12. L. Ramanan, M. Kumar and KPV Ramanakumar, “Six Sigma Methodology for Addressing Employability Issue of Engineering Graduates,” International Journal of Modern Education Forum, Vol. 3, Issue 2, pp. 59  -  66, May, 2014. ISSN: 2324  -  6944 (Online), 2324  -  6928 (Print)

 

1 January, 2013 to 31 December, 2013

  1. Sangam Samal and P. K. Dash, “Reduction of Wingtip Vortices by Using Active  Means,”  International Journal of Scientific & Engineering Research,  Vol. 4, Issue 4, pp. 1280  -  1287, Apr. 2013. ISSN: 22295518
  2. Sangam Samal and P. K. Dash, “Reduction of Wingtip Vortex from Suction at Wingtip,” Journal of Mechanical Engineering Research, Vol. 3, No. 1, pp. 152  -  162, 2013.  ISSN: 2141  -  2383 

 

1 January, 2012 to 31 December, 2012

  1. R. Santhana Krishnan, P. K. Dash, A. Joseph Stanley and M. Sabarish, “Flexural Property Evaluation of GFRP   -   Foam Sandwich Composite   -   An Experimental Approach,” Journal of Engineering and Applied Sciences, Vol. 7, No. 10, pp. 1300  -  1306, Oct. 2012. ISSN: 1819  -  6608
  2. J. Sandeep, K. Bharadwajan, M. Y. Ali, P. V. Ramana Murti, and T. Tirupathi “Investigation of Supersonic Combustion with Cavity Based Injection in a SCRamjet Combustor,” International Journal of Research in Engineering & Applied Sciences, Vol. 2, Issue 2, pp. 1258  -  1268, Feb. 2012. ISSN: 2249  -  3905 (Online), 2349 – 6525 (Print)
  3. Dalbir Singh and P.K. Dash, “Role of Damage Parameters in Remaining Life Assessment of Composites in Aircraft Structures,” Journal of Procedia Engineering, Vol. 38, pp. 2702–2712, 2012. DOI:10.1016/j.proeng.2012.06.317

 

1 January, 2011 to 31 December, 2011

  1. P. K. Dash, R. Sathishbabu and C. Ganesan, “Effect of Corrosive Environment on Elasto  -  Buckling Strength of GFRC Plate,” Asian Journal of Materials Science, Vol. 3, Issue 1, pp. 5  -  19, 2011. DOI: 10.3923/ajmskr.2011.5.19
  2. P. Manivannan, P. K. Dash and B. T. N. Sridhar, “An Experimental Study on Comparison of Non  -  circular Co  -  Flow Jet With Co  -  axial Jets and Computational Verification,” Space Research Journal, Vol. 4, pp. 60  -  70, May 2011. DOI: 10.3923/srj.2011.60.70
  3. P. K. Dash and Y. Balto, “Generation of Nano  -  Copper Particles through Wire Explosion Method and its Characterization,” Research Journal of Nanoscience and Nanotechnology, Vol. 1, Issue 1, pp. 25  -  33, 2011. DOI: 10.3923/rjnn.2011.25.33
  4. P. K. Dash and D. Singh, “Shear Characterization of Woven Carbon/Epoxy Composite under Various Adverse Environments,” International Journal of Strain, Vol. 47, Issue 5, pp. 458–468, Oct. 2011. DOI: 10.1111/j.1475  -  1305.2010.00736.x
  5. C. Ganesan and P. K. Dash, “Elasto  -  Buckling Behavior of gfrp Laminated Plate With Central Holes,” International Journal of Mechanical & Industrial Engineering, Vol. 1, Issue 1, pp. 73  -  76, 2011. ISSN: 2231  -  6477
  6. Yash Pal, K. Kalpit, and P. K. Dash, “Regression Rate Study of PVC/HTPB Hybrid Rocket Fuels,” International Journal of Mechanical & Industrial Engineering, Vol. 1, Issue 1, pp. 64  -  67, 2011. ISSN: 2231  -  6477